10 Scientific Research & Development jobs in Thailand
Laboratory Technician (Electrical and Electronics)
Bangkok, Bangkok
UL, LLC
Posted 1 day ago
Job Viewed
Job Description
+ Responsible for the setup and performance of equipment and test setups for clients.
+ Builds and/or adapts setup and test equipment for performance of tests.
+ Examines test samples and reads blueprints, schematics, wiring diagrams, measuring instruments, and operational instructions.
+ Follows basically defined test plans and datasheets.
+ Evaluates test performance and sample operation to properly evaluate test results.
+ Records and explains test results and completes test report.
+ Builds and/or adapts setup and test equipment to new situations, based on data sheets and instructions from engineering department personnel.
+ May direct staff in test setups.
+ Examines less complex customer samples and learns to operate appropriate tests for each case with necessary supervision/support.
+ Communicates with customers during setup and operation to ensure proper evaluation.
+ Operates designated machines and special laboratory equipment.
+ Performs routine maintenance of designated test equipment and laboratory area.
+ May perform basic calibration of test equipment.
+ Reads and understands specific test standards and testing technology for scope of responsibility with necessary supervision/support.
+ Initiates recommendations for new equipment designs and recommends solutions to observed test problems.
+ Receives instructions from and reports data to engineers and engineering management.
+ May communicate with clients during test setups to discuss test methods and/or test results.
+ Operates with minimal supervision within defined limits of responsibility.
+ Records observed or calculated data on appropriate UL forms and prepares data sheets and test reports.
+ May plan tests, evaluate test results and report opinions and interpretations, as directed. Integrates basic continuous improvement concepts and techniques into all aspects of the job.
+ Communicates with management and technical staff to provide suggestions for new equipment, processes, and forms to improve accuracy and efficiencies.
+ Higher Secondary Education plus three years related experience preferred.
+ Working experience in the Laboratory (2 years)
+ Effective communication skills and ability to interact with customers.
+ Proven ability to be innovative and creative.
+ Desire to work in a team-oriented environment. Ability to use Microsoft Office suite is a must. Ability to incorporate automation into day-to-day testing.
A global leader in applied safety science, UL Solutions (NYSE: ULS) transforms safety, security and sustainability challenges into opportunities for customers in more than 110 countries. UL Solutions delivers testing, inspection and certification services, together with software products and advisory offerings, that support our customers' product innovation and business growth. The UL Mark serves as a recognized symbol of trust in our customers' products and reflects an unwavering commitment to advancing our safety mission. We help our customers innovate, launch new products and services, navigate global markets and complex supply chains, and grow sustainably and responsibly into the future. Our science is your advantage.
UL LLC has been and will continue to be an equal opportunity employer. To assure full implementation of this equal employment policy, we will take steps to assure that:
Persons are recruited, hired, assigned and promoted without regard to race, color, age, sex or gender, sexual orientation, gender identity, gender expression, transgender status, religion, creed, national origin, ethnicity, citizenship, ancestry, disability, genetic information, military or veteran status, pregnancy, marital or familial status, or any other protected category under applicable law.
+ Builds and/or adapts setup and test equipment for performance of tests.
+ Examines test samples and reads blueprints, schematics, wiring diagrams, measuring instruments, and operational instructions.
+ Follows basically defined test plans and datasheets.
+ Evaluates test performance and sample operation to properly evaluate test results.
+ Records and explains test results and completes test report.
+ Builds and/or adapts setup and test equipment to new situations, based on data sheets and instructions from engineering department personnel.
+ May direct staff in test setups.
+ Examines less complex customer samples and learns to operate appropriate tests for each case with necessary supervision/support.
+ Communicates with customers during setup and operation to ensure proper evaluation.
+ Operates designated machines and special laboratory equipment.
+ Performs routine maintenance of designated test equipment and laboratory area.
+ May perform basic calibration of test equipment.
+ Reads and understands specific test standards and testing technology for scope of responsibility with necessary supervision/support.
+ Initiates recommendations for new equipment designs and recommends solutions to observed test problems.
+ Receives instructions from and reports data to engineers and engineering management.
+ May communicate with clients during test setups to discuss test methods and/or test results.
+ Operates with minimal supervision within defined limits of responsibility.
+ Records observed or calculated data on appropriate UL forms and prepares data sheets and test reports.
+ May plan tests, evaluate test results and report opinions and interpretations, as directed. Integrates basic continuous improvement concepts and techniques into all aspects of the job.
+ Communicates with management and technical staff to provide suggestions for new equipment, processes, and forms to improve accuracy and efficiencies.
+ Higher Secondary Education plus three years related experience preferred.
+ Working experience in the Laboratory (2 years)
+ Effective communication skills and ability to interact with customers.
+ Proven ability to be innovative and creative.
+ Desire to work in a team-oriented environment. Ability to use Microsoft Office suite is a must. Ability to incorporate automation into day-to-day testing.
A global leader in applied safety science, UL Solutions (NYSE: ULS) transforms safety, security and sustainability challenges into opportunities for customers in more than 110 countries. UL Solutions delivers testing, inspection and certification services, together with software products and advisory offerings, that support our customers' product innovation and business growth. The UL Mark serves as a recognized symbol of trust in our customers' products and reflects an unwavering commitment to advancing our safety mission. We help our customers innovate, launch new products and services, navigate global markets and complex supply chains, and grow sustainably and responsibly into the future. Our science is your advantage.
UL LLC has been and will continue to be an equal opportunity employer. To assure full implementation of this equal employment policy, we will take steps to assure that:
Persons are recruited, hired, assigned and promoted without regard to race, color, age, sex or gender, sexual orientation, gender identity, gender expression, transgender status, religion, creed, national origin, ethnicity, citizenship, ancestry, disability, genetic information, military or veteran status, pregnancy, marital or familial status, or any other protected category under applicable law.
This advertiser has chosen not to accept applicants from your region.
0
Laboratory Technician (Electrical and Electronics)
UL, LLC
Posted 1 day ago
Job Viewed
Job Description
+ Responsible for the setup and performance of equipment and test setups for clients.
+ Builds and/or adapts setup and test equipment for performance of tests.
+ Examines test samples and reads blueprints, schematics, wiring diagrams, measuring instruments, and operational instructions.
+ Follows basically defined test plans and datasheets.
+ Evaluates test performance and sample operation to properly evaluate test results.
+ Records and explains test results and completes test report.
+ Builds and/or adapts setup and test equipment to new situations, based on data sheets and instructions from engineering department personnel.
+ May direct staff in test setups.
+ Examines less complex customer samples and learns to operate appropriate tests for each case with necessary supervision/support.
+ Communicates with customers during setup and operation to ensure proper evaluation.
+ Operates designated machines and special laboratory equipment.
+ Performs routine maintenance of designated test equipment and laboratory area.
+ May perform basic calibration of test equipment.
+ Reads and understands specific test standards and testing technology for scope of responsibility with necessary supervision/support.
+ Initiates recommendations for new equipment designs and recommends solutions to observed test problems.
+ Receives instructions from and reports data to engineers and engineering management.
+ May communicate with clients during test setups to discuss test methods and/or test results.
+ Operates with minimal supervision within defined limits of responsibility.
+ Records observed or calculated data on appropriate UL forms and prepares data sheets and test reports.
+ May plan tests, evaluate test results and report opinions and interpretations, as directed. Integrates basic continuous improvement concepts and techniques into all aspects of the job.
+ Communicates with management and technical staff to provide suggestions for new equipment, processes, and forms to improve accuracy and efficiencies.
+ Higher Secondary Education plus three years related experience preferred.
+ Working experience in the Laboratory (2 years)
+ Effective communication skills and ability to interact with customers.
+ Proven ability to be innovative and creative.
+ Desire to work in a team-oriented environment. Ability to use Microsoft Office suite is a must. Ability to incorporate automation into day-to-day testing.
A global leader in applied safety science, UL Solutions (NYSE: ULS) transforms safety, security and sustainability challenges into opportunities for customers in more than 110 countries. UL Solutions delivers testing, inspection and certification services, together with software products and advisory offerings, that support our customers' product innovation and business growth. The UL Mark serves as a recognized symbol of trust in our customers' products and reflects an unwavering commitment to advancing our safety mission. We help our customers innovate, launch new products and services, navigate global markets and complex supply chains, and grow sustainably and responsibly into the future. Our science is your advantage.
UL LLC has been and will continue to be an equal opportunity employer. To assure full implementation of this equal employment policy, we will take steps to assure that:
Persons are recruited, hired, assigned and promoted without regard to race, color, age, sex or gender, sexual orientation, gender identity, gender expression, transgender status, religion, creed, national origin, ethnicity, citizenship, ancestry, disability, genetic information, military or veteran status, pregnancy, marital or familial status, or any other protected category under applicable law.
+ Builds and/or adapts setup and test equipment for performance of tests.
+ Examines test samples and reads blueprints, schematics, wiring diagrams, measuring instruments, and operational instructions.
+ Follows basically defined test plans and datasheets.
+ Evaluates test performance and sample operation to properly evaluate test results.
+ Records and explains test results and completes test report.
+ Builds and/or adapts setup and test equipment to new situations, based on data sheets and instructions from engineering department personnel.
+ May direct staff in test setups.
+ Examines less complex customer samples and learns to operate appropriate tests for each case with necessary supervision/support.
+ Communicates with customers during setup and operation to ensure proper evaluation.
+ Operates designated machines and special laboratory equipment.
+ Performs routine maintenance of designated test equipment and laboratory area.
+ May perform basic calibration of test equipment.
+ Reads and understands specific test standards and testing technology for scope of responsibility with necessary supervision/support.
+ Initiates recommendations for new equipment designs and recommends solutions to observed test problems.
+ Receives instructions from and reports data to engineers and engineering management.
+ May communicate with clients during test setups to discuss test methods and/or test results.
+ Operates with minimal supervision within defined limits of responsibility.
+ Records observed or calculated data on appropriate UL forms and prepares data sheets and test reports.
+ May plan tests, evaluate test results and report opinions and interpretations, as directed. Integrates basic continuous improvement concepts and techniques into all aspects of the job.
+ Communicates with management and technical staff to provide suggestions for new equipment, processes, and forms to improve accuracy and efficiencies.
+ Higher Secondary Education plus three years related experience preferred.
+ Working experience in the Laboratory (2 years)
+ Effective communication skills and ability to interact with customers.
+ Proven ability to be innovative and creative.
+ Desire to work in a team-oriented environment. Ability to use Microsoft Office suite is a must. Ability to incorporate automation into day-to-day testing.
A global leader in applied safety science, UL Solutions (NYSE: ULS) transforms safety, security and sustainability challenges into opportunities for customers in more than 110 countries. UL Solutions delivers testing, inspection and certification services, together with software products and advisory offerings, that support our customers' product innovation and business growth. The UL Mark serves as a recognized symbol of trust in our customers' products and reflects an unwavering commitment to advancing our safety mission. We help our customers innovate, launch new products and services, navigate global markets and complex supply chains, and grow sustainably and responsibly into the future. Our science is your advantage.
UL LLC has been and will continue to be an equal opportunity employer. To assure full implementation of this equal employment policy, we will take steps to assure that:
Persons are recruited, hired, assigned and promoted without regard to race, color, age, sex or gender, sexual orientation, gender identity, gender expression, transgender status, religion, creed, national origin, ethnicity, citizenship, ancestry, disability, genetic information, military or veteran status, pregnancy, marital or familial status, or any other protected category under applicable law.
This advertiser has chosen not to accept applicants from your region.
1
Senior supervisor - Analytical Lab
Chonburi, Chonburi
Colgate-Palmolive
Posted 2 days ago
Job Viewed
Job Description
No Relocation Assistance Offered
Job Number # - Chonburi, Chonburi, Thailand
**Who We Are**
Colgate-Palmolive Company is a global consumer products company operating in over 200 countries specializing in Oral Care, Personal Care, Home Care, Skin Care, and Pet Nutrition. Our products are trusted in more households than any other brand in the world, making us a household name!
Join Colgate-Palmolive, a caring, innovative growth company reimagining a healthier future for people, their pets, and our planet. Guided by our core values-Caring, Inclusive, and Courageous-we foster a culture that inspires our people to achieve common goals. Together, let's build a brighter, healthier future for all.
**Supervisor - Quality (Analytical Lab)**
Do you want to come to work with a smile and leave with one as well? In between those smiles, your day consists of working in a global organization, continually learning and collaborating, having stimulating discussions, and making impactful contributions!
If this is how you see your career, Colgate is the place to be!
Our dependable household brands, dedicated employees, and sustainability commitments make us a company passionate about building a future to smile about for our employees, consumers, and surrounding communities. The pride in our brand fuels a workplace that encourages creative thinking, champions experimentation, and promotes authenticity which has contributed to our enduring success.
If you want to work for a company that lives by their values, then give your career a reason to smile.every single day.
The Supervisor - Quality (Analytical Lab) is responsible for the overseeing, planning, developing, and directing quality assurance policies, programs, and initiatives for the Analytical Laboratory. Oversees the process and testing of ensure testing complies with established quality standards and government regulations.
**What you will do**
+ Develop a laboratory sampling, sample retention and testing program for raw materials, work in progress (WIP), and finished products at the facility.
+ Be competent in the performance of routine laboratory test procedures, and operation of analytical instruments and other standard laboratory equipment.
+ Understand and use basic laboratory safety equipment and instructions, precautions in handling reagents and disposal of chemical waste according to local environmental regulations.
+ Ensure the interpretation, reporting of data and maintenance of records are documented and effectively implemented. Including the use of statistical analysis and Statistical Process Control where appropriate.
+ Understand and be able to precisely follow written lab procedures, global methods, local methods and published standard or compendia sources. Translate corporate global methods to the local language as required.
+ Ensure the calibration of analytical instruments, the use of analytical reference standards and the maintenance of the equipment are established and followed.
+ Ensure the installation qualification (IQ), operation qualification (OQ) and performance qualification (PQ) of the analytical instruments are performed.
+ Devise and execute a program of routine problem resolution and continuous improvement.
+ Develop and monitor the coaching and training of the staff in the chemical laboratory.
+ Participate in internal audits. Conduct and report internal verification of all the laboratory testing units, based on the laboratory testing standard and other quality-related operating standards. Function as part of the Plant's GMP and Quality Teams.
+ Interface with Divisional GMP, Quality Audit and GTC Analytical Teams. Serve as an in-plant resource during external audits by regulatory agencies or other third parties.
+ Ensure that analytical methods for key release specifications (KRS) of finished products have gone through appropriate validations and the local laboratory is qualified to perform the analysis prior to manufacturing the product.
**Required Qualifications**
+ Bachelor's Degree in Chemistry or Chemical Engineering, Pharmaceutical Science, or related field.
+ 3-5 years of laboratory experience in the pharmaceutical, cosmetic, or consumer products industries.
+ Strong knowledge of laboratory compliance and quality systems
+ Proficiency in standard laboratory operations and techniques.
+ Demonstrated team leadership capabilities.
+ Professional working proficiency in English (reading, writing, and speaking).
+ Knowledge of statistical analysis and process control (SPC) tools.
**Compensation and Benefits**
Salary Range $40,000.00 - $81,000.00 USD
Pay is determined based on experience, qualifications, and location. Salaried employees may also be eligible for discretionary bonuses, profit-sharing, and long-term incentives for Executive-level roles.
Benefits: Salaried employees enjoy a comprehensive benefits package, including medical, dental, vision, basic life insurance, paid parental leave, disability coverage, and participation in the 401(k) retirement plan with company matching contributions subject to eligibility requirements. Additional benefits include a minimum of 15 vacation/PTO days (hourly employees receive a minimum of 120 hours) and 13 paid holidays (vacation days are prorated based on the employee's hire date within the calendar year). Paid sick leave is adjusted based on role and location in accordance with local laws. Detailed information regarding paid sick leave entitlements will be provided to employees upon hiring and may be subject to adjustments based on changes in legislation or company policies.
**Our Commitment to Inclusion**
Our journey begins with our people-developing strong talent with diverse backgrounds and perspectives to best serve our consumers around the world and fostering an inclusive environment where everyone feels a true sense of belonging. We are dedicated to ensuring that each individual can be their authentic self, is treated with respect, and is empowered by leadership to contribute meaningfully to our business.
**Equal Opportunity Employer**
Colgate is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, ethnicity, age, disability, marital status, veteran status (United States positions), or any other characteristic protected by law.
Reasonable accommodation during the application process is available for persons with disabilities. Please complete this request form ( should you require accommodation.
For additional Colgate terms and conditions, please click here ( .
#LI-On-site
Job Number # - Chonburi, Chonburi, Thailand
**Who We Are**
Colgate-Palmolive Company is a global consumer products company operating in over 200 countries specializing in Oral Care, Personal Care, Home Care, Skin Care, and Pet Nutrition. Our products are trusted in more households than any other brand in the world, making us a household name!
Join Colgate-Palmolive, a caring, innovative growth company reimagining a healthier future for people, their pets, and our planet. Guided by our core values-Caring, Inclusive, and Courageous-we foster a culture that inspires our people to achieve common goals. Together, let's build a brighter, healthier future for all.
**Supervisor - Quality (Analytical Lab)**
Do you want to come to work with a smile and leave with one as well? In between those smiles, your day consists of working in a global organization, continually learning and collaborating, having stimulating discussions, and making impactful contributions!
If this is how you see your career, Colgate is the place to be!
Our dependable household brands, dedicated employees, and sustainability commitments make us a company passionate about building a future to smile about for our employees, consumers, and surrounding communities. The pride in our brand fuels a workplace that encourages creative thinking, champions experimentation, and promotes authenticity which has contributed to our enduring success.
If you want to work for a company that lives by their values, then give your career a reason to smile.every single day.
The Supervisor - Quality (Analytical Lab) is responsible for the overseeing, planning, developing, and directing quality assurance policies, programs, and initiatives for the Analytical Laboratory. Oversees the process and testing of ensure testing complies with established quality standards and government regulations.
**What you will do**
+ Develop a laboratory sampling, sample retention and testing program for raw materials, work in progress (WIP), and finished products at the facility.
+ Be competent in the performance of routine laboratory test procedures, and operation of analytical instruments and other standard laboratory equipment.
+ Understand and use basic laboratory safety equipment and instructions, precautions in handling reagents and disposal of chemical waste according to local environmental regulations.
+ Ensure the interpretation, reporting of data and maintenance of records are documented and effectively implemented. Including the use of statistical analysis and Statistical Process Control where appropriate.
+ Understand and be able to precisely follow written lab procedures, global methods, local methods and published standard or compendia sources. Translate corporate global methods to the local language as required.
+ Ensure the calibration of analytical instruments, the use of analytical reference standards and the maintenance of the equipment are established and followed.
+ Ensure the installation qualification (IQ), operation qualification (OQ) and performance qualification (PQ) of the analytical instruments are performed.
+ Devise and execute a program of routine problem resolution and continuous improvement.
+ Develop and monitor the coaching and training of the staff in the chemical laboratory.
+ Participate in internal audits. Conduct and report internal verification of all the laboratory testing units, based on the laboratory testing standard and other quality-related operating standards. Function as part of the Plant's GMP and Quality Teams.
+ Interface with Divisional GMP, Quality Audit and GTC Analytical Teams. Serve as an in-plant resource during external audits by regulatory agencies or other third parties.
+ Ensure that analytical methods for key release specifications (KRS) of finished products have gone through appropriate validations and the local laboratory is qualified to perform the analysis prior to manufacturing the product.
**Required Qualifications**
+ Bachelor's Degree in Chemistry or Chemical Engineering, Pharmaceutical Science, or related field.
+ 3-5 years of laboratory experience in the pharmaceutical, cosmetic, or consumer products industries.
+ Strong knowledge of laboratory compliance and quality systems
+ Proficiency in standard laboratory operations and techniques.
+ Demonstrated team leadership capabilities.
+ Professional working proficiency in English (reading, writing, and speaking).
+ Knowledge of statistical analysis and process control (SPC) tools.
**Compensation and Benefits**
Salary Range $40,000.00 - $81,000.00 USD
Pay is determined based on experience, qualifications, and location. Salaried employees may also be eligible for discretionary bonuses, profit-sharing, and long-term incentives for Executive-level roles.
Benefits: Salaried employees enjoy a comprehensive benefits package, including medical, dental, vision, basic life insurance, paid parental leave, disability coverage, and participation in the 401(k) retirement plan with company matching contributions subject to eligibility requirements. Additional benefits include a minimum of 15 vacation/PTO days (hourly employees receive a minimum of 120 hours) and 13 paid holidays (vacation days are prorated based on the employee's hire date within the calendar year). Paid sick leave is adjusted based on role and location in accordance with local laws. Detailed information regarding paid sick leave entitlements will be provided to employees upon hiring and may be subject to adjustments based on changes in legislation or company policies.
**Our Commitment to Inclusion**
Our journey begins with our people-developing strong talent with diverse backgrounds and perspectives to best serve our consumers around the world and fostering an inclusive environment where everyone feels a true sense of belonging. We are dedicated to ensuring that each individual can be their authentic self, is treated with respect, and is empowered by leadership to contribute meaningfully to our business.
**Equal Opportunity Employer**
Colgate is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, ethnicity, age, disability, marital status, veteran status (United States positions), or any other characteristic protected by law.
Reasonable accommodation during the application process is available for persons with disabilities. Please complete this request form ( should you require accommodation.
For additional Colgate terms and conditions, please click here ( .
#LI-On-site
This advertiser has chosen not to accept applicants from your region.
2
Laboratory Technician
Bangkok, Bangkok
Shell
Posted 2 days ago
Job Viewed
Job Description
Bangkok, Thailand
**Job Family Group:**
Technical Support Jobs
**Worker Type:**
Regular
**Posting Start Date:**
September 15, 2025
**Business unit:**
Projects and Technology
**Experience Level:**
Experienced Professionals
**Job Description:**
**Key Responsibilities:**
+ Prepare bitumen samples for testing using standard methods, including heating, pouring, and conditioning.
+ Conduct routine and complex laboratory tests on bitumen, such as: Penetration Grade, Softening Point (Ring & Ball), Viscosity (Rotational, Brookfield), Ductility, Flash Point (Cleveland Open Cup), Solubility, Elastic Recovery (for modified binders), Dynamic Shear Rheometer (DSR) & Bending Beam Rheometer (BBR) tests, Saybolt Viscosity, Cone penetration
+ Accurately record, analyze, and report test data using laboratory information management systems (LIMS) or spreadsheets.
+ Support in calibration and maintain laboratory equipment to ensure accuracy and reliability.
+ Monitor and maintain laboratory inventory of supplies and chemicals.
+ Adhere to strict safety protocols, including the proper handling and disposal of hazardous materials.
+ Maintain a clean, organized, and safe laboratory environment.
+ Assist in the investigation of product non-conformances and customer complaints.
+ Collaborate with production and quality assurance teams to provide timely test results and support continuous improvement initiatives.
+ Follow all company policies, procedures, and ISO standards.
**Qualifications :**
+ Minimum of Bachelors degree in related fields
+ Working experience in Laboratory at least 2-3 years
+ Knowledge of Bitumen testing is preferred
+ Good command of English in both written and verbal
+ Able to work in shift work rotation
-
**DISCLAIMER:**
Please note: We occasionally amend or withdraw Shell jobs and reserve the right to do so at any time, including prior to the advertised closing date. Before applying, you are advised to read our data protection policy. This policy describes the processing that may be associated with your personal data and informs you that your personal data may be transferred to Shell/Shell Group companies around the world. The Shell Group and its approved recruitment consultants will never ask you for a fee to process or consider your application for a career with Shell. Anyone who demands such a fee is not an authorised Shell representative and you are strongly advised to refuse any such demand. Shell is an Equal Opportunity Employer.
You can be a part of the future of energy. Together at Shell, we are transitioning to become a net-zero emissions business while providing the energy that people around the world need today. Working with experienced colleagues , you'll have the opportunity to develop your skills, in an environment where we value honesty, integrity and respect for one another. At Shell, you progress as we tackle the energy challenge together.
#PowerYourProgress
**Visit our careers site ( has a bold goal: to become one of the world's most diverse and inclusive companies, a place where everyone - from our employees to our customers, partners and suppliers - feels valued, respected, and has a strong sense of belonging.
Find out more about DE&I at Shell ( is a global group of energy and petrochemical companies, employing 96,000 people across more than 70 countries.
Whether they work on our platforms and pipelines, or in our offices and research labs, people are key to our success. They collectively determine our culture and we expect them to behave according to our values: honesty, integrity, and respect for people.
Learn more about our purpose and strategy ( **_If you need any assistance or support while applying for a job, please contact us at_** ** ** _"_
**Job Family Group:**
Technical Support Jobs
**Worker Type:**
Regular
**Posting Start Date:**
September 15, 2025
**Business unit:**
Projects and Technology
**Experience Level:**
Experienced Professionals
**Job Description:**
**Key Responsibilities:**
+ Prepare bitumen samples for testing using standard methods, including heating, pouring, and conditioning.
+ Conduct routine and complex laboratory tests on bitumen, such as: Penetration Grade, Softening Point (Ring & Ball), Viscosity (Rotational, Brookfield), Ductility, Flash Point (Cleveland Open Cup), Solubility, Elastic Recovery (for modified binders), Dynamic Shear Rheometer (DSR) & Bending Beam Rheometer (BBR) tests, Saybolt Viscosity, Cone penetration
+ Accurately record, analyze, and report test data using laboratory information management systems (LIMS) or spreadsheets.
+ Support in calibration and maintain laboratory equipment to ensure accuracy and reliability.
+ Monitor and maintain laboratory inventory of supplies and chemicals.
+ Adhere to strict safety protocols, including the proper handling and disposal of hazardous materials.
+ Maintain a clean, organized, and safe laboratory environment.
+ Assist in the investigation of product non-conformances and customer complaints.
+ Collaborate with production and quality assurance teams to provide timely test results and support continuous improvement initiatives.
+ Follow all company policies, procedures, and ISO standards.
**Qualifications :**
+ Minimum of Bachelors degree in related fields
+ Working experience in Laboratory at least 2-3 years
+ Knowledge of Bitumen testing is preferred
+ Good command of English in both written and verbal
+ Able to work in shift work rotation
-
**DISCLAIMER:**
Please note: We occasionally amend or withdraw Shell jobs and reserve the right to do so at any time, including prior to the advertised closing date. Before applying, you are advised to read our data protection policy. This policy describes the processing that may be associated with your personal data and informs you that your personal data may be transferred to Shell/Shell Group companies around the world. The Shell Group and its approved recruitment consultants will never ask you for a fee to process or consider your application for a career with Shell. Anyone who demands such a fee is not an authorised Shell representative and you are strongly advised to refuse any such demand. Shell is an Equal Opportunity Employer.
You can be a part of the future of energy. Together at Shell, we are transitioning to become a net-zero emissions business while providing the energy that people around the world need today. Working with experienced colleagues , you'll have the opportunity to develop your skills, in an environment where we value honesty, integrity and respect for one another. At Shell, you progress as we tackle the energy challenge together.
#PowerYourProgress
**Visit our careers site ( has a bold goal: to become one of the world's most diverse and inclusive companies, a place where everyone - from our employees to our customers, partners and suppliers - feels valued, respected, and has a strong sense of belonging.
Find out more about DE&I at Shell ( is a global group of energy and petrochemical companies, employing 96,000 people across more than 70 countries.
Whether they work on our platforms and pipelines, or in our offices and research labs, people are key to our success. They collectively determine our culture and we expect them to behave according to our values: honesty, integrity, and respect for people.
Learn more about our purpose and strategy ( **_If you need any assistance or support while applying for a job, please contact us at_** ** ** _"_
This advertiser has chosen not to accept applicants from your region.
3
Lab Analyst
Chachoengsao, Chachoengsao
Procter & Gamble
Posted 2 days ago
Job Viewed
Job Description
Job Location
Chachoengsao
Job Description
Responsible to perform routine, usually basic laboratory testing and maintenance of laboratory equipment/systems; to review data vs. specifications and perform lab investigations as needed; and to perform basic troubleshooting of analytical methods and equipment. Leads the team of lab analysts in their day to day work.
Job Qualifications
Overview of the job
Responsible to do the analysis of Raw material, Packaging material, In process material, Bulk product and Finish Product follow P&G Method. To be experienced and deeply know technical mastery in own system or/and own equipment. Own fully the responsibility to further both a safe workplace and work systems that meet quality/compliance expectations.
Your team
This role reports to chemical laboratory leader and one up manager is chemical laboratory manager
Responsibilities of the role
+ You will learn to do the analysis of Raw material, Packaging material, in process material, bulk product and Finished Product follow P&G Method
+ Responsible to attend training and qualification program and pass qualification criteria within the accurate documentation
+ Responsible to maintain their area to meet GMP, QAC requirement and 5'S standard
+ -Own fully the responsibility to foster both a safe workplace and work systems that meet quality/compliance expectations.
+ Continue find and fix defect in the own area while cleaning execution
+ Improve the capability to work with free defect by applying IWS/AM/PM /Kaizen/ 5S and related IWS tool and also to build capability to use failure analysis, Why-Why tool and set trouble shooting.
+ To be experienced and deeply know technical deep understanding in own system or/and own equipment
+ Develop procedure/DMS/tracking system to get and maintain the result
Role Requirements
Perform to test percentage of Nitrogen, Active matter, all assay method, Arsenic, Free Amine, Hydroxyl Value, Identification, Insoluble Iron, Iodine Value, etc.
Criteria
Educational requirements start with a diploma or higher in a relevant Chemistry subject.
About us
We produce globally recognized brands, and we grow the best business leaders in the industry. With a portfolio of trusted brands as diverse as ours, it is paramount our leaders are able to lead with courage the vast array of brands, categories and functions. We serve consumers around the world with one of the strongest portfolios of trusted, quality, leadership brands, including Always®, Ariel®, Gillette®, Head & Shoulders®, Herbal Essences®, Oral-B®, Pampers®, Pantene®, Tampax® and more. Our community includes operations in approximately 70 countries worldwide.
Visit to know more.
We are an equal opportunity employer and value diversity at our company. We do not discriminate against individuals on the basis of race, color, gender, age, national origin, religion, sexual orientation, gender identity or expression, marital status, citizenship, disability, HIV/AIDS status, or any other legally protected factor.
Job Schedule
Full time
Job Number
R
Job Segmentation
Plant Technicians (Job Segmentation)
Chachoengsao
Job Description
Responsible to perform routine, usually basic laboratory testing and maintenance of laboratory equipment/systems; to review data vs. specifications and perform lab investigations as needed; and to perform basic troubleshooting of analytical methods and equipment. Leads the team of lab analysts in their day to day work.
Job Qualifications
Overview of the job
Responsible to do the analysis of Raw material, Packaging material, In process material, Bulk product and Finish Product follow P&G Method. To be experienced and deeply know technical mastery in own system or/and own equipment. Own fully the responsibility to further both a safe workplace and work systems that meet quality/compliance expectations.
Your team
This role reports to chemical laboratory leader and one up manager is chemical laboratory manager
Responsibilities of the role
+ You will learn to do the analysis of Raw material, Packaging material, in process material, bulk product and Finished Product follow P&G Method
+ Responsible to attend training and qualification program and pass qualification criteria within the accurate documentation
+ Responsible to maintain their area to meet GMP, QAC requirement and 5'S standard
+ -Own fully the responsibility to foster both a safe workplace and work systems that meet quality/compliance expectations.
+ Continue find and fix defect in the own area while cleaning execution
+ Improve the capability to work with free defect by applying IWS/AM/PM /Kaizen/ 5S and related IWS tool and also to build capability to use failure analysis, Why-Why tool and set trouble shooting.
+ To be experienced and deeply know technical deep understanding in own system or/and own equipment
+ Develop procedure/DMS/tracking system to get and maintain the result
Role Requirements
Perform to test percentage of Nitrogen, Active matter, all assay method, Arsenic, Free Amine, Hydroxyl Value, Identification, Insoluble Iron, Iodine Value, etc.
Criteria
Educational requirements start with a diploma or higher in a relevant Chemistry subject.
About us
We produce globally recognized brands, and we grow the best business leaders in the industry. With a portfolio of trusted brands as diverse as ours, it is paramount our leaders are able to lead with courage the vast array of brands, categories and functions. We serve consumers around the world with one of the strongest portfolios of trusted, quality, leadership brands, including Always®, Ariel®, Gillette®, Head & Shoulders®, Herbal Essences®, Oral-B®, Pampers®, Pantene®, Tampax® and more. Our community includes operations in approximately 70 countries worldwide.
Visit to know more.
We are an equal opportunity employer and value diversity at our company. We do not discriminate against individuals on the basis of race, color, gender, age, national origin, religion, sexual orientation, gender identity or expression, marital status, citizenship, disability, HIV/AIDS status, or any other legally protected factor.
Job Schedule
Full time
Job Number
R
Job Segmentation
Plant Technicians (Job Segmentation)
This advertiser has chosen not to accept applicants from your region.
4
Supplier Quality Assurance Specialist
Lamphun, Lamphun
Safran
Posted 2 days ago
Job Viewed
Job Description
Supplier Quality Assurance Specialist
Company : Safran Cabin
Job field : Purchasing
Location : Lamphun , Thailand
Contract type : Permanent
Contract duration : Full-time
Required degree : Bachelor's Degree
Required experience : More than 8 years
Professional status : Professional, Engineer & Manager
Spoken language(s) :
English Fluent
Thai Mother tongue
#
Apply with one click Any questions ?
**Job Description**
3.0 Detailed department related duties
Summary of Duties
3.1 Responsible for ensuring quality compliance of parts /materials to meet product /part specification and standard related.
3.2 Control and monitor parts quality and on time delivery of suppliers
- Responsible for the incoming inspection team to ensure they perform according to WI of inspection works and that all incoming inspection detail is correct.
- Use statistical approach to monitor quality data of the supplier and publish weekly/month report basis or any report request.
- Collect and evaluate supplier quality and on time delivery data to identify process improvement opportunities within the supply chain.
- Maintain supplier quality and on time delivery metrics and provide regular feedback to all suppliers
3.3 Lead effort to resolve supplier quality issues.
3.4 Review and analyze supplier non-conformance reports, perform internal investigation and participate in material review board.
3.5 Work directly with supplier to investigate rot cause and identify/follow up corrective actions.
3.6 Issue NCR and or 8D to suppliers and coordinate with purchase team to follow their corrective action.
- Verify the defect of material issue related
- Initiate and follow-up Supplier Corrective Actions (SCAR) in partnership with Manufacturing Engineering to ensure complete and effective root cause analysis and corrective action implementation.
- Manage suppliers' non-conformances, including their disposition, documentation, and communication.
- Validate the action items by quality control technics, communicating with suppliers.
3.7 Perform supplier audits to evaluate supplier compliance to SAFRAN requirements and audits required for supplier approval/re-approval process. Follow up on corrective actions resulting from audit findings.
3.8 Implement quality-related action plans to enable suppliers to achieve an acceptable performance level.
3.9 Provide assistance to suppliers on new products, process capability improvements, quality systems development.
3.10 Work with Engineering Team and Sourcing team to evaluate potential suppliers.
- Evaluate potential suppliers' quality management systems.
- Ensure that the right quality, customer flow down and regulatory requirements are properly called out on the drawings, purchase orders, and contracts before their transmission to suppliers.
- Conduct capability assessments that verify supplier qualifications, and travel to assigned suppliers.
3.11 Participate as a member of the Material Review Board to review and disposition Supplier related Nonconformance Material Reports as required
3.12 Assist supplier on product qualification and first article inspection activities
3.13 Lead Advanced Product Quality Planning (APQP) activity as assigned from manager.
3.14 Assure that all supplier quality related activities are conducted in compliance with the SAFRAN Standard.
3.15 Supervise and coach SQA Engineer.
**Job Requirements**
4.1 Thai Nationality only.
4.2 Complete bachelor's degree in ME/IE/EE or any field related.
4.3 Experience: 5 years of progressive quality experience in aerospace, automotive or mechanical manufacturing environment with the ability to lead and influence others. AS/ISO standards. Experience in supplier quality audit is preferable.
4.4 Ability to read and understand drawing, technical specifications, technical report, etc.,
4.5 Ability to write technical documents, audit reports, non-conformance dispositions
4.6 Strong knowledge APQP, PPAP, 8D and FAI Process
4.7 Capable of MS. Office and other Application.
4.8 Other Skills: Must be very organized, detailed oriented, systematic and accurate. Strong problem-solving skills. Knowledge of Lean and six sigma tools is desired.
4.9 Fluent communication in English is mandatory. Additional languages are a plus.
**But what else? (advantages, specific features, etc.)**
3.16 Cooperate with teams related on problem solving, quality improvement activities.
3.17 Implement SAFRAN specification and standard on concern process.
3.18 Process improvement as project assign.
3.19 Lead and coach supplier quality engineer.
3.20 Support and represent Supplier Performance Management Manager as assign.
3.21 Reduce Quarantine Inventory of RTV.
3.22 FAI Report review and approval.
3.23 Weekly/Monthly/Quarterly reports.
**Company Information**
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets.
Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking.
Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
**Locate your future workplace**
Ban Klang, Mueang Lamphun District51000
Lamphun
Thailand
100,000
employees worldwide
27
Number of countries where Safran is located
35
business area families
+ Maps are available under theOpen Database Licence ( .
+ © OpenStreetMap ( contributors.
+ © Safran
Safran is an Equal Opportunity Employer
All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.
Company : Safran Cabin
Job field : Purchasing
Location : Lamphun , Thailand
Contract type : Permanent
Contract duration : Full-time
Required degree : Bachelor's Degree
Required experience : More than 8 years
Professional status : Professional, Engineer & Manager
Spoken language(s) :
English Fluent
Thai Mother tongue
#
Apply with one click Any questions ?
**Job Description**
3.0 Detailed department related duties
Summary of Duties
3.1 Responsible for ensuring quality compliance of parts /materials to meet product /part specification and standard related.
3.2 Control and monitor parts quality and on time delivery of suppliers
- Responsible for the incoming inspection team to ensure they perform according to WI of inspection works and that all incoming inspection detail is correct.
- Use statistical approach to monitor quality data of the supplier and publish weekly/month report basis or any report request.
- Collect and evaluate supplier quality and on time delivery data to identify process improvement opportunities within the supply chain.
- Maintain supplier quality and on time delivery metrics and provide regular feedback to all suppliers
3.3 Lead effort to resolve supplier quality issues.
3.4 Review and analyze supplier non-conformance reports, perform internal investigation and participate in material review board.
3.5 Work directly with supplier to investigate rot cause and identify/follow up corrective actions.
3.6 Issue NCR and or 8D to suppliers and coordinate with purchase team to follow their corrective action.
- Verify the defect of material issue related
- Initiate and follow-up Supplier Corrective Actions (SCAR) in partnership with Manufacturing Engineering to ensure complete and effective root cause analysis and corrective action implementation.
- Manage suppliers' non-conformances, including their disposition, documentation, and communication.
- Validate the action items by quality control technics, communicating with suppliers.
3.7 Perform supplier audits to evaluate supplier compliance to SAFRAN requirements and audits required for supplier approval/re-approval process. Follow up on corrective actions resulting from audit findings.
3.8 Implement quality-related action plans to enable suppliers to achieve an acceptable performance level.
3.9 Provide assistance to suppliers on new products, process capability improvements, quality systems development.
3.10 Work with Engineering Team and Sourcing team to evaluate potential suppliers.
- Evaluate potential suppliers' quality management systems.
- Ensure that the right quality, customer flow down and regulatory requirements are properly called out on the drawings, purchase orders, and contracts before their transmission to suppliers.
- Conduct capability assessments that verify supplier qualifications, and travel to assigned suppliers.
3.11 Participate as a member of the Material Review Board to review and disposition Supplier related Nonconformance Material Reports as required
3.12 Assist supplier on product qualification and first article inspection activities
3.13 Lead Advanced Product Quality Planning (APQP) activity as assigned from manager.
3.14 Assure that all supplier quality related activities are conducted in compliance with the SAFRAN Standard.
3.15 Supervise and coach SQA Engineer.
**Job Requirements**
4.1 Thai Nationality only.
4.2 Complete bachelor's degree in ME/IE/EE or any field related.
4.3 Experience: 5 years of progressive quality experience in aerospace, automotive or mechanical manufacturing environment with the ability to lead and influence others. AS/ISO standards. Experience in supplier quality audit is preferable.
4.4 Ability to read and understand drawing, technical specifications, technical report, etc.,
4.5 Ability to write technical documents, audit reports, non-conformance dispositions
4.6 Strong knowledge APQP, PPAP, 8D and FAI Process
4.7 Capable of MS. Office and other Application.
4.8 Other Skills: Must be very organized, detailed oriented, systematic and accurate. Strong problem-solving skills. Knowledge of Lean and six sigma tools is desired.
4.9 Fluent communication in English is mandatory. Additional languages are a plus.
**But what else? (advantages, specific features, etc.)**
3.16 Cooperate with teams related on problem solving, quality improvement activities.
3.17 Implement SAFRAN specification and standard on concern process.
3.18 Process improvement as project assign.
3.19 Lead and coach supplier quality engineer.
3.20 Support and represent Supplier Performance Management Manager as assign.
3.21 Reduce Quarantine Inventory of RTV.
3.22 FAI Report review and approval.
3.23 Weekly/Monthly/Quarterly reports.
**Company Information**
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets.
Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking.
Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
**Locate your future workplace**
Ban Klang, Mueang Lamphun District51000
Lamphun
Thailand
100,000
employees worldwide
27
Number of countries where Safran is located
35
business area families
+ Maps are available under theOpen Database Licence ( .
+ © OpenStreetMap ( contributors.
+ © Safran
Safran is an Equal Opportunity Employer
All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.
This advertiser has chosen not to accept applicants from your region.
5
Advanced R&D Engr/Scientist
Honeywell
Posted 2 days ago
Job Viewed
Job Description
**THE FUTURE IS WHAT WE MAKE IT.**
**_Advanced R&D Engineer_**
**_Chonburi, Thailand_**
Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.
**Make the Best You.**
Working at Honeywell is not just creating incredible things. You will collaborate with top minds, grow through continuous learning, and benefit from an inclusive environment that rewards performance and celebrate achievements.
**Join Us and Make an Impact.**
We are currently seeking an **Advanced R&D Engineer** to join our team in our **_Chonburi, Thailand_** office.
"In October, 2024 Honeywell announced the spin-off of our Advanced Materials business to become a stand-alone publicly traded company, independent of Honeywell. Our intention is that this role, dedicated to the Advanced Materials business, will be a part of this future transaction when the separation occurs."
**Key Responsibilities:**
**1. Research and Analysis:**
a. Conduct research to understand existing chemical processes and identify areas for improvement.
b. Design and direct high-impact research projects, ensuring they align with the department & company's innovation goals.
c. Drive the development of cutting-edge technologies or methodologies in the chemical field.
d. Select and design appropriate equipment for chemical plating processes, considering factors such as material compatibility, safety, and efficiency.
e. Provide input on long-term research plans and technological advancements.
**2. Process Design and Optimization:**
a. Design and develop new chemical processes or modify existing ones to improve efficiency, safety, and sustainability. This involves analyzing data, troubleshooting issues, and implementing changes for optimization.
b. Optimize process parameters to achieve desired outcomes, such as increased yield, reduced waste, and lower production costs.
c. Assess and manage risks associated with R&D projects, ensuring that potential challenges are identified and addressed proactively.
d. Select and design appropriate equipment for chemical plating processes, considering factors such as material compatibility, safety, and efficiency.
**3. Safety and Compliance:**
a. Ensure that new chemical processes comply with safety regulations and environmental standards.
b. Identify and mitigate potential hazards associated with the new chemical plating processes.
c. Stay abreast of safety regulatory requirements and ensure that R&D activities comply with relevant regulations and standards.
**4. Scale-Up:**
a. Work on scaling up laboratory processes to larger production scales, ensuring that the developed processes can be implemented on an industrial scale. Collaborate with cross-functional teams, including process engineers, mechanical engineers, and technicians, to bring projects from concept to implementation.
**5. Intellectual Property Management:**
a. Oversee the creation and protection of intellectual property, including patents, trade secrets, and proprietary technologies.
b. Ensure compliance with legal and ethical standards regarding intellectual property.
**6. Documentation and Reporting:**
a. Prepare technical reports and documentation for internal and external stakeholders.
b. Maintain detailed records of experiments, process parameters, and results.
c. Effectively communicate research findings, project updates, and strategic plans to both technical and non-technical stakeholders.
**7. Mentorship:**
a. Provide mentorship to other R&D staff and ISC process engineers, guiding them in their projects, activities, and professional development.
b. Foster a collaborative and innovative research culture within the R&D team.
**MUST HAVE:**
· Experience in Chemical process preferably Ni+Au plating on OFC copper.
· Experience in transferring new technologies to manufacturing is required.
· Experience directly applying DOE, statistical methods.
· Experience in designing production equivalent rapid prototypes.
· Has experience working on cross functional technical teams and has the capability of providing coordination among groups or functions
· Decision Making - Required to make data driven decisions on technical issues.
· Knowledge of DOE's, Statistical analysis of data & SPC is desired.
· Six Sigma Green Belt certification or equivalent experience implementing continuous improvement projects.
**WE VALUE**
· Systematic planning, execution, and documentation.
· Open mind and quick learning
· Strong communication skills
· Ability to work with inside cross-functional and cross-region teams.
**Who We Are**
The Future Is What We Make It at Honeywell. From sustainable aviation fuel and life-saving healthcare sensors to collaborating on every NASA space mission since the 1950's, over 100 years of innovation has always been driven by an investment in our people. Learn more about Honeywell: More**
Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
For more information on how we process your information in the job application process, please refer to honeywell.com/us/en/privacy-statement .
If a disability prevents you from applying for a job through our website, e-mail No other requests will be acknowledged.
**Copyright © 2025 Honeywell International Inc.**
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
**_Advanced R&D Engineer_**
**_Chonburi, Thailand_**
Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.
**Make the Best You.**
Working at Honeywell is not just creating incredible things. You will collaborate with top minds, grow through continuous learning, and benefit from an inclusive environment that rewards performance and celebrate achievements.
**Join Us and Make an Impact.**
We are currently seeking an **Advanced R&D Engineer** to join our team in our **_Chonburi, Thailand_** office.
"In October, 2024 Honeywell announced the spin-off of our Advanced Materials business to become a stand-alone publicly traded company, independent of Honeywell. Our intention is that this role, dedicated to the Advanced Materials business, will be a part of this future transaction when the separation occurs."
**Key Responsibilities:**
**1. Research and Analysis:**
a. Conduct research to understand existing chemical processes and identify areas for improvement.
b. Design and direct high-impact research projects, ensuring they align with the department & company's innovation goals.
c. Drive the development of cutting-edge technologies or methodologies in the chemical field.
d. Select and design appropriate equipment for chemical plating processes, considering factors such as material compatibility, safety, and efficiency.
e. Provide input on long-term research plans and technological advancements.
**2. Process Design and Optimization:**
a. Design and develop new chemical processes or modify existing ones to improve efficiency, safety, and sustainability. This involves analyzing data, troubleshooting issues, and implementing changes for optimization.
b. Optimize process parameters to achieve desired outcomes, such as increased yield, reduced waste, and lower production costs.
c. Assess and manage risks associated with R&D projects, ensuring that potential challenges are identified and addressed proactively.
d. Select and design appropriate equipment for chemical plating processes, considering factors such as material compatibility, safety, and efficiency.
**3. Safety and Compliance:**
a. Ensure that new chemical processes comply with safety regulations and environmental standards.
b. Identify and mitigate potential hazards associated with the new chemical plating processes.
c. Stay abreast of safety regulatory requirements and ensure that R&D activities comply with relevant regulations and standards.
**4. Scale-Up:**
a. Work on scaling up laboratory processes to larger production scales, ensuring that the developed processes can be implemented on an industrial scale. Collaborate with cross-functional teams, including process engineers, mechanical engineers, and technicians, to bring projects from concept to implementation.
**5. Intellectual Property Management:**
a. Oversee the creation and protection of intellectual property, including patents, trade secrets, and proprietary technologies.
b. Ensure compliance with legal and ethical standards regarding intellectual property.
**6. Documentation and Reporting:**
a. Prepare technical reports and documentation for internal and external stakeholders.
b. Maintain detailed records of experiments, process parameters, and results.
c. Effectively communicate research findings, project updates, and strategic plans to both technical and non-technical stakeholders.
**7. Mentorship:**
a. Provide mentorship to other R&D staff and ISC process engineers, guiding them in their projects, activities, and professional development.
b. Foster a collaborative and innovative research culture within the R&D team.
**MUST HAVE:**
· Experience in Chemical process preferably Ni+Au plating on OFC copper.
· Experience in transferring new technologies to manufacturing is required.
· Experience directly applying DOE, statistical methods.
· Experience in designing production equivalent rapid prototypes.
· Has experience working on cross functional technical teams and has the capability of providing coordination among groups or functions
· Decision Making - Required to make data driven decisions on technical issues.
· Knowledge of DOE's, Statistical analysis of data & SPC is desired.
· Six Sigma Green Belt certification or equivalent experience implementing continuous improvement projects.
**WE VALUE**
· Systematic planning, execution, and documentation.
· Open mind and quick learning
· Strong communication skills
· Ability to work with inside cross-functional and cross-region teams.
**Who We Are**
The Future Is What We Make It at Honeywell. From sustainable aviation fuel and life-saving healthcare sensors to collaborating on every NASA space mission since the 1950's, over 100 years of innovation has always been driven by an investment in our people. Learn more about Honeywell: More**
Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
For more information on how we process your information in the job application process, please refer to honeywell.com/us/en/privacy-statement .
If a disability prevents you from applying for a job through our website, e-mail No other requests will be acknowledged.
**Copyright © 2025 Honeywell International Inc.**
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
This advertiser has chosen not to accept applicants from your region.
Be The First To Know
About the latest Scientific research and development Jobs in Thailand !
6
Advanced R&D Engr/Scientist
Chonburi, Chonburi
Honeywell
Posted 2 days ago
Job Viewed
Job Description
**THE FUTURE IS WHAT WE MAKE IT.**
**_Advanced R&D Engineer_**
**_Chonburi, Thailand_**
Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.
**Make the Best You.**
Working at Honeywell is not just creating incredible things. You will collaborate with top minds, grow through continuous learning, and benefit from an inclusive environment that rewards performance and celebrate achievements.
**Join Us and Make an Impact.**
We are currently seeking an **Advanced R&D Engineer** to join our team in our **_Chonburi, Thailand_** office.
"In October, 2024 Honeywell announced the spin-off of our Advanced Materials business to become a stand-alone publicly traded company, independent of Honeywell. Our intention is that this role, dedicated to the Advanced Materials business, will be a part of this future transaction when the separation occurs."
**Key Responsibilities:**
**1. Research and Analysis:**
a. Conduct research to understand existing chemical processes and identify areas for improvement.
b. Design and direct high-impact research projects, ensuring they align with the department & company's innovation goals.
c. Drive the development of cutting-edge technologies or methodologies in the chemical field.
d. Select and design appropriate equipment for chemical plating processes, considering factors such as material compatibility, safety, and efficiency.
e. Provide input on long-term research plans and technological advancements.
**2. Process Design and Optimization:**
a. Design and develop new chemical processes or modify existing ones to improve efficiency, safety, and sustainability. This involves analyzing data, troubleshooting issues, and implementing changes for optimization.
b. Optimize process parameters to achieve desired outcomes, such as increased yield, reduced waste, and lower production costs.
c. Assess and manage risks associated with R&D projects, ensuring that potential challenges are identified and addressed proactively.
d. Select and design appropriate equipment for chemical plating processes, considering factors such as material compatibility, safety, and efficiency.
**3. Safety and Compliance:**
a. Ensure that new chemical processes comply with safety regulations and environmental standards.
b. Identify and mitigate potential hazards associated with the new chemical plating processes.
c. Stay abreast of safety regulatory requirements and ensure that R&D activities comply with relevant regulations and standards.
**4. Scale-Up:**
a. Work on scaling up laboratory processes to larger production scales, ensuring that the developed processes can be implemented on an industrial scale. Collaborate with cross-functional teams, including process engineers, mechanical engineers, and technicians, to bring projects from concept to implementation.
**5. Intellectual Property Management:**
a. Oversee the creation and protection of intellectual property, including patents, trade secrets, and proprietary technologies.
b. Ensure compliance with legal and ethical standards regarding intellectual property.
**6. Documentation and Reporting:**
a. Prepare technical reports and documentation for internal and external stakeholders.
b. Maintain detailed records of experiments, process parameters, and results.
c. Effectively communicate research findings, project updates, and strategic plans to both technical and non-technical stakeholders.
**7. Mentorship:**
a. Provide mentorship to other R&D staff and ISC process engineers, guiding them in their projects, activities, and professional development.
b. Foster a collaborative and innovative research culture within the R&D team.
**MUST HAVE:**
· Experience in Chemical process preferably Ni+Au plating on OFC copper.
· Experience in transferring new technologies to manufacturing is required.
· Experience directly applying DOE, statistical methods.
· Experience in designing production equivalent rapid prototypes.
· Has experience working on cross functional technical teams and has the capability of providing coordination among groups or functions
· Decision Making - Required to make data driven decisions on technical issues.
· Knowledge of DOE's, Statistical analysis of data & SPC is desired.
· Six Sigma Green Belt certification or equivalent experience implementing continuous improvement projects.
**WE VALUE**
· Systematic planning, execution, and documentation.
· Open mind and quick learning
· Strong communication skills
· Ability to work with inside cross-functional and cross-region teams.
**Who We Are**
The Future Is What We Make It at Honeywell. From sustainable aviation fuel and life-saving healthcare sensors to collaborating on every NASA space mission since the 1950's, over 100 years of innovation has always been driven by an investment in our people. Learn more about Honeywell: More**
Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
For more information on how we process your information in the job application process, please refer to honeywell.com/us/en/privacy-statement .
If a disability prevents you from applying for a job through our website, e-mail No other requests will be acknowledged.
**Copyright © 2025 Honeywell International Inc.**
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
**_Advanced R&D Engineer_**
**_Chonburi, Thailand_**
Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.
**Make the Best You.**
Working at Honeywell is not just creating incredible things. You will collaborate with top minds, grow through continuous learning, and benefit from an inclusive environment that rewards performance and celebrate achievements.
**Join Us and Make an Impact.**
We are currently seeking an **Advanced R&D Engineer** to join our team in our **_Chonburi, Thailand_** office.
"In October, 2024 Honeywell announced the spin-off of our Advanced Materials business to become a stand-alone publicly traded company, independent of Honeywell. Our intention is that this role, dedicated to the Advanced Materials business, will be a part of this future transaction when the separation occurs."
**Key Responsibilities:**
**1. Research and Analysis:**
a. Conduct research to understand existing chemical processes and identify areas for improvement.
b. Design and direct high-impact research projects, ensuring they align with the department & company's innovation goals.
c. Drive the development of cutting-edge technologies or methodologies in the chemical field.
d. Select and design appropriate equipment for chemical plating processes, considering factors such as material compatibility, safety, and efficiency.
e. Provide input on long-term research plans and technological advancements.
**2. Process Design and Optimization:**
a. Design and develop new chemical processes or modify existing ones to improve efficiency, safety, and sustainability. This involves analyzing data, troubleshooting issues, and implementing changes for optimization.
b. Optimize process parameters to achieve desired outcomes, such as increased yield, reduced waste, and lower production costs.
c. Assess and manage risks associated with R&D projects, ensuring that potential challenges are identified and addressed proactively.
d. Select and design appropriate equipment for chemical plating processes, considering factors such as material compatibility, safety, and efficiency.
**3. Safety and Compliance:**
a. Ensure that new chemical processes comply with safety regulations and environmental standards.
b. Identify and mitigate potential hazards associated with the new chemical plating processes.
c. Stay abreast of safety regulatory requirements and ensure that R&D activities comply with relevant regulations and standards.
**4. Scale-Up:**
a. Work on scaling up laboratory processes to larger production scales, ensuring that the developed processes can be implemented on an industrial scale. Collaborate with cross-functional teams, including process engineers, mechanical engineers, and technicians, to bring projects from concept to implementation.
**5. Intellectual Property Management:**
a. Oversee the creation and protection of intellectual property, including patents, trade secrets, and proprietary technologies.
b. Ensure compliance with legal and ethical standards regarding intellectual property.
**6. Documentation and Reporting:**
a. Prepare technical reports and documentation for internal and external stakeholders.
b. Maintain detailed records of experiments, process parameters, and results.
c. Effectively communicate research findings, project updates, and strategic plans to both technical and non-technical stakeholders.
**7. Mentorship:**
a. Provide mentorship to other R&D staff and ISC process engineers, guiding them in their projects, activities, and professional development.
b. Foster a collaborative and innovative research culture within the R&D team.
**MUST HAVE:**
· Experience in Chemical process preferably Ni+Au plating on OFC copper.
· Experience in transferring new technologies to manufacturing is required.
· Experience directly applying DOE, statistical methods.
· Experience in designing production equivalent rapid prototypes.
· Has experience working on cross functional technical teams and has the capability of providing coordination among groups or functions
· Decision Making - Required to make data driven decisions on technical issues.
· Knowledge of DOE's, Statistical analysis of data & SPC is desired.
· Six Sigma Green Belt certification or equivalent experience implementing continuous improvement projects.
**WE VALUE**
· Systematic planning, execution, and documentation.
· Open mind and quick learning
· Strong communication skills
· Ability to work with inside cross-functional and cross-region teams.
**Who We Are**
The Future Is What We Make It at Honeywell. From sustainable aviation fuel and life-saving healthcare sensors to collaborating on every NASA space mission since the 1950's, over 100 years of innovation has always been driven by an investment in our people. Learn more about Honeywell: More**
Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
For more information on how we process your information in the job application process, please refer to honeywell.com/us/en/privacy-statement .
If a disability prevents you from applying for a job through our website, e-mail No other requests will be acknowledged.
**Copyright © 2025 Honeywell International Inc.**
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
This advertiser has chosen not to accept applicants from your region.
7
Research & Development Staff
Chon Buri, Chonburi
JAC Personnel Thailand Ltd.
Posted today
Job Viewed
Job Description
บริษัท:
- JAC Personnel Thailand Ltd.
- รายละเอียดงาน:
- Research consumer behavior to develop product to meet consumer satisfaction.
- Analyse consumer data, competitor information concern technology to design or create practical product development.
- Development and maintain product trial plans according to project goals.
- Evaluate new and improved mateial for product improvement / cost optimization purpose.
- Drafting, editing, updating of product design concepts and preliminary product specification.
- Develop and assist in maintenance of product specification.
- Renewal of paper diapers development of new products of diapers test and design in
- อัตรา:
- 3 ตำแหน่ง
- เงินเดือน:
- Open (Depend on experience) บาท
- สถานที่ปฏิบัติงาน:
- Amata City Industrial Estate
- จังหวัด:
- ระยอง
- คุณสมบัติผู้สมัครงาน:
- 1. Male - Female, Age 22 years old up.
- 2. Bachelor's Degree of Engineering or Science which is related to Chemical fields
- 3. Having a year of working experience in R&D, QA/QC or New model with Chemical industry.
- 4. Good command in spoken and written in English.
- 5. Able to speak Japanese would be an advantage.
- 6. Has abilities in Microsoft Office and Auto CAD.
- 7. ติดต่อ : Khun Amornratt (Klouy) โทร :
- รายละเอียดบริษัท:
- JAC Thailand is part of an Asia-wide recruiting firm network. With well-established offices in Singapore, Japan, China, Korea, Indonesia, Malaysia and Thailand JAC Recruitment provide high quality recruiting services to the Asian market.
- Originally set up in London in 1975, the firm has over 35 years experience in recruiting industry professionals from all sectors.- Our 40+ recruiters in the Bangkok and Eastern Seaboard Branches specialize in industries and actively search for professionals across all functions including Sales/Marketing, Accounting/Financial Services, Industrial/Manufacturing, IT, HR, Engineering, Logistics/Shipping, Branding/Advertising and others.
- We at JAC provide full-scale recruitment services on a success fee basis. If you have any current hiring needs, please do not hesitate to contact us. We would be pleased to help you identify the best professionals for your operations.
- วิธีการสมัครงาน:
- ติดต่อ:
- JAC Human Resources
**JAC Personnel Thailand Ltd.**
622 10th Flooor Emporium Tower, Soi 24 Sukhumvit Road แขวงคลองตัน เขตคลองเตย กรุงเทพมหานคร 10110
- JAC Personnel Thailand Ltd.
- รายละเอียดงาน:
- Research consumer behavior to develop product to meet consumer satisfaction.
- Analyse consumer data, competitor information concern technology to design or create practical product development.
- Development and maintain product trial plans according to project goals.
- Evaluate new and improved mateial for product improvement / cost optimization purpose.
- Drafting, editing, updating of product design concepts and preliminary product specification.
- Develop and assist in maintenance of product specification.
- Renewal of paper diapers development of new products of diapers test and design in
- อัตรา:
- 3 ตำแหน่ง
- เงินเดือน:
- Open (Depend on experience) บาท
- สถานที่ปฏิบัติงาน:
- Amata City Industrial Estate
- จังหวัด:
- ระยอง
- คุณสมบัติผู้สมัครงาน:
- 1. Male - Female, Age 22 years old up.
- 2. Bachelor's Degree of Engineering or Science which is related to Chemical fields
- 3. Having a year of working experience in R&D, QA/QC or New model with Chemical industry.
- 4. Good command in spoken and written in English.
- 5. Able to speak Japanese would be an advantage.
- 6. Has abilities in Microsoft Office and Auto CAD.
- 7. ติดต่อ : Khun Amornratt (Klouy) โทร :
- รายละเอียดบริษัท:
- JAC Thailand is part of an Asia-wide recruiting firm network. With well-established offices in Singapore, Japan, China, Korea, Indonesia, Malaysia and Thailand JAC Recruitment provide high quality recruiting services to the Asian market.
- Originally set up in London in 1975, the firm has over 35 years experience in recruiting industry professionals from all sectors.- Our 40+ recruiters in the Bangkok and Eastern Seaboard Branches specialize in industries and actively search for professionals across all functions including Sales/Marketing, Accounting/Financial Services, Industrial/Manufacturing, IT, HR, Engineering, Logistics/Shipping, Branding/Advertising and others.
- We at JAC provide full-scale recruitment services on a success fee basis. If you have any current hiring needs, please do not hesitate to contact us. We would be pleased to help you identify the best professionals for your operations.
- วิธีการสมัครงาน:
- ติดต่อ:
- JAC Human Resources
**JAC Personnel Thailand Ltd.**
622 10th Flooor Emporium Tower, Soi 24 Sukhumvit Road แขวงคลองตัน เขตคลองเตย กรุงเทพมหานคร 10110
This advertiser has chosen not to accept applicants from your region.
8
Research and Development Manager
Pasona HR Consulting Recruitment (Thailand) Co.,Ltd
Posted today
Job Viewed
Job Description
Job ID
49751
Business
Manufacturing(Machinery)
Job Detail
- Manage and support R&D team to develop packaging materials to meet with customer
requirement and quality standards.
- Raw Material Development to support new product development, cost reduction / Improvement and sustainable packaging
- Product Design & Innovation by seeking for new innovation and technology in packaging industry and adapt to company.
- Budget and cost management of materials and reduce materials usage.
- Analyze market requirements with the management committee to set a yearly product strategy plan.
- Manage RD team and laboratories for supporting company sites.
- Create innovative products, specifications, standard test methods, and quality information to deploy to all concerned departments, and keep quality monitoring from sample production until commercial order to ensure quality performance.
- Handle problem analysis, solving, and service for customers and the company.
- Cooperate with the sales, purchasing, and Production teams and material suppliers for product quality.
- Build a close communication and relationship with customers as you provide technical knowledge and fast response on any customer request or issue.
- Work with the sales for Sustainability Projects
- Cooperate with group company in ASEAN to researchers for product development projects.
- Support plant audits from customers or system certification bodies such as ISO, FSSC, BRC, and HACCP.
Salary
45,000 - 75,000 (THB)
Location
Samut Prakan
Required work
experience
- Knowledge in packaging / polymer / plastic materials / R&D field.
- Experience in R&D packaging for more than 10 years is an advantage.
- Technical competency (problem solving, project management & improvement,
technical support)
- Good command in English
- Experience in R&D function in packaging ( Film, Plastic ) longer than 5 years
- Experience in flexible packaging or Film production process.
- Education: Specification: University - Bachelor degree or above
Field: Packaging technology, Material science /Engineering in material, chemical science
49751
Business
Manufacturing(Machinery)
Job Detail
- Manage and support R&D team to develop packaging materials to meet with customer
requirement and quality standards.
- Raw Material Development to support new product development, cost reduction / Improvement and sustainable packaging
- Product Design & Innovation by seeking for new innovation and technology in packaging industry and adapt to company.
- Budget and cost management of materials and reduce materials usage.
- Analyze market requirements with the management committee to set a yearly product strategy plan.
- Manage RD team and laboratories for supporting company sites.
- Create innovative products, specifications, standard test methods, and quality information to deploy to all concerned departments, and keep quality monitoring from sample production until commercial order to ensure quality performance.
- Handle problem analysis, solving, and service for customers and the company.
- Cooperate with the sales, purchasing, and Production teams and material suppliers for product quality.
- Build a close communication and relationship with customers as you provide technical knowledge and fast response on any customer request or issue.
- Work with the sales for Sustainability Projects
- Cooperate with group company in ASEAN to researchers for product development projects.
- Support plant audits from customers or system certification bodies such as ISO, FSSC, BRC, and HACCP.
Salary
45,000 - 75,000 (THB)
Location
Samut Prakan
Required work
experience
- Knowledge in packaging / polymer / plastic materials / R&D field.
- Experience in R&D packaging for more than 10 years is an advantage.
- Technical competency (problem solving, project management & improvement,
technical support)
- Good command in English
- Experience in R&D function in packaging ( Film, Plastic ) longer than 5 years
- Experience in flexible packaging or Film production process.
- Education: Specification: University - Bachelor degree or above
Field: Packaging technology, Material science /Engineering in material, chemical science
This advertiser has chosen not to accept applicants from your region.
9