What Jobs are available for Flow Engineer in Thailand?

MISSION

• To lead the industrialization of the new P1
• To improve the production efficiency (machine & Direct Labor) in its perimeter
• Capitalize and share the know-how of industrial processes in his domain
• To participate on the design of new equipment and new lines
• To lead Lean design workshop

Industrialization

• To manage production equipment introduction using IPROM
• To follow equipment or assembly lines development with the supplier
• To design small tool and validate the supplier proposal
• To define the acceptance criteria for new equipment or line
• To perform pre acceptance and acceptance of the equipment
• To perform trials on the lines and deliver reports
• To built action plans and follow up to be ready for FDPR
• To perform and/or collect, capabilities of equipments and process
• To set up equipment and propose PROCESS VALIDATION PLAN
• To participate on PFMEA and CONTROL PLAN

Mass production

• To monitor QCDM and propose improvement
• To survey the performance of equipments , and always in mind, optimization
• To work on Cycle time reduction to optimize investments, material & labor costs
• To update routing on Information system with SPV validation
• To support production technician ( training, analysis, problem solving)
• To be in contact with the suppliers ( improvement, support)
• To participate to SPV workshop
• To participle to APU QRQC

Standardization

• Validate PG RAISE and CdC standards which are created by Standard Owners
• Validate any change of standard proposed by sites
• To know, apply and promote the standards ( PG, sites or corporate) in his domain
• To apply the SPV rules

Environment

• Ensure the respect of Safety and Environment procedures of Valeo Group
• Maintain the 5S and report issues
• Alert for safety rules infringement

Job description:

• Responsible for developing new processes and designing new process plants and equipment or modifying existing ones.

• Assist in the development of processing plans, methods, design, materials handling, P&ID

• Collecting data required to make improvements and modifications in formaldehyde plant ,resins plant and utility system

• Supervising plant operations  with operator staff

• Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs of each process.

• Overseeing the construction of extension plant or new plants

• Research and purchase new manufacturing technology.

• Investigating and troubleshooting plant/process problems

• Ensuring safe working conditions and compliance with health and safety legislation.

• Work with R&D team to develop resins performance and working production process.

Qualifications:

• Bachelor / Master Degree in Chemical Engineering, Petrochemical Engineering, Electrical Engineering or Instrument Engineering

• 1-3 years working experience in chemical industries or related field.

• Good communication skill, positive, positive thinking, service mind, decision making skills. Initiative and flexible.

• Strong presentation, analytical and problem solving skills.

• Good command of spoken and written English and Computer literacy

• Program   Autocad

All positions require good command of English and knowledge of PC.

Interested persons should send an application letter, a resume with full details of work experience, expected salary and contact telephone number together with a recent photograph.

Responsibilities :

• Plan, control, and improve production processes to achieve efficiency and minimize waste.
• Analyze and enhance production performance (Productivity/Yield).
• Supervise and manage the engineering team to achieve department and company goals.
• Coordinate with Production, Maintenance, and Quality Control teams to resolve technical issues.
• Develop and improve printing technology and process to align with paper box manufacturing operations.
• Prepare reports, analyze process data, and propose continuous improvement initiatives.

Qualifications :

• Male or Female
• Aged 28 years and above.
• Bachelor's degree or higher in Engineering (Mechanical, Industrial, Electrical, or related fields).
• Minimum of 5 years' experience in Process Engineering or Process Improvement.
• Experience in Printing or Printer Process is highly preferred.
• Strong analytical, problem-solving, and team management skills.
• Good command of English communication skills (speaking, reading, and writing).
• Proficient in engineering-related software and general office applications.

Job Description:

1. Process Management

• Lead the Frontend, Backend Process, and NPI for PCBAs products.

• Monitor all process flow to ensure that the process is in control.

• Design process flow and process capacity calculation. 

2. Process Optimization Process Management

• Continuously analyze and optimize processes to enhance efficiency, reduce defects, and improve product quality.

• Implement the use of SPC for the control process  

• Analyze the yield of processes to ensure process capabilities

• Optimize setup and program to improve Process Effectiveness  

3. Quality Management

• Implement and maintain quality control measures to ensure PCBAs meet quality standards and customer requirements. 

• Conduct inspections and audits to identify and address quality issues, implementing corrective actions as needed.

4. Equipment Management

• To manage and ensure the program setup, operation, and maintenance of machines are accurate and efficient. 

• Design and development of new tooling for new and/or existing processes.

5. Document and Report Management 

• Maintain accurate records of all process activities, including equipment performance, defects, and improvements. 

• To manage and provide regular reports on production metrics, performance, and improvements and relevant teams.

6. Manage DFM/DFA and PCB penalization.

• Evaluate PCBA designs for Design for Manufacturability (DFM) and Design for Assembly (DFA) consideration.

• Ensure penalization designs meet manufacturing and assembly requirements.

7. Manage stencil design and orders.

• Create and maintain stencil designs for SMT and THT processes.

• Coordinate with suppliers for stencil orders and track delivery status.

1. Provide technical expertise.
   
   • Offer technical guidance and support in PCB Laser Mark, SMT, THT, Conformal coating, Resin potting, and mechanical assembly processes, including machine program review.
   
   • Troubleshoot and resolve issues in PCBA manufacturing and assembly, including leading troubleshooting efforts.
   
   • Stay updated with industry trends and best practices in PCBA manufacturing. 
2. Support the RFQ Department for accurate quotes.
   
   • Perform process simulation for SMT, THT Selective, Conformal Coating, Potting processes. etc.
   
   • Collaborate with the RFQ team to provide technical input and cost estimation for quotes.
3. Training and Team Support Management.
   
   • Design training methods, teaching and instruction for individuals and groups, and the measurement of training effects and safety protocols.

Qualifications

• Bachelor's in engineering, or a related field
• 10+ years of work experience in an electronics manufacturing company
• 5+ years of management experience
• Driven, self-motivated, hands-on, and excellent team player
• Able to identify weak spots in processes and improve efficiency
• Strong management and organizational skills
• Drive team to achieve company targets and KPIs
• Able to work in an international team
• Fluency in communicating in Thai is essential
• Excellent English communication skills

• Lead, mentor, and manage a team of process engineers focusing on optical engine production.
• Define, develop, and optimize manufacturing processes for critical optical components and subsystems
• Collaborate with R&D / Design Engineering to transfer new designs into manufacturable, cost‑effective processes.
• Identify and implement process improvements to increase yield, throughput, process capability, and reduce scrap / rework.
• Oversee process characterization: DOE (Design of Experiments), statistical methods (SPC, Six Sigma), process capability (Cp, Cpk), root cause analysis, failure mode and effects analysis (FMEA).
• Ensure that process flows are well documented; create and maintain work instructions, process specifications, process qualification plans, and process validation as needed.
• Manage process equipment selection, installation, qualification, maintenance, and optimization.
• Monitor production metrics (yield, cycle time, first pass yield, cost per unit), report status, and lead corrective action when metrics are not met.
• Drive continuous improvement initiatives (e.g. Lean Manufacturing, Kaizen) to reduce waste, cost, time to market.
• Ensure compliance with quality, environmental, safety standards, and regulatory requirements relevant to optical and photonic devices.
• Collaborate with Supply Chain / Materials Engineering to ensure availability, quality, and cost of raw materials, adhesives, coatings, optical glass, etc.
• Risk management: anticipate process-related risks, mitigate proactively, support design for manufacturability (DFM) / design for test (DFT).
• Budgeting: manage process engineering budget, capex for process tools/equipment, spare parts, etc.

• Bachelor's or Master's degree in Optics, Photonics, Electrical Engineering, Mechanical Engineering, Materials Science, or related field.

• Typically 8+ years in process engineering / manufacturing in optics / photonics / optical engines / semiconductor or related industry, with 3+ years in a leadership role.
• Hands‑on experience in high-speed optical component manufacturing: ROSA, TOSA, COC,etc.
• Strong background in process control, statistical analysis, DOE, SPC, root cause analysis, FMEA.
• Proven track record of yield improvement, cost reduction, scale‑up from prototype to mass production.
• Experience with optical measurement metrology, quality test, environmental / reliability testing (temperature, humidity, vibration, shock) is a plus.
• Familiarity with cleanroom manufacturing, safety, and environmental regulations (e.g. ISO 9001, ).

• Strong leadership, team building, mentoring, and communication skills.
• Analytical thinking, problem solving, attention to detail.
• Ability to work cross‑functionally with R&D, Quality, Supply Chain, Manufacturing.
• Solid project management skills: schedule management, prioritization, risk management.
• Proficient in statistical software / tools (Minitab, JMP, MATLAB, etc.).
• Knowledge of CAD / mechanical / optical design tools is beneficial.
• Fluent in English; additional languages depending on location beneficial.

About the role

Eagle Ottawa (Thailand) Co., Ltd. is seeking a talented and experienced Senior Process Engineer to join our team in Rayong. In this full-time role, you will play a crucial part in driving the continuous improvement and optimization of our manufacturing processes, ensuring we maintain the highest standards of quality and efficiency.

What you'll be doing

Functional Job Activities (Please specify the percentage of each activity):

Activity 1: Product and Process Development & Validation for new programs

Goal Ensure to meet customer's timing / quality requirement with validated manufacturing capability.

1.   Work with Commercial to receive and control customer drawings and math data

2.   Review customer drawings and math data and create engineering BOM and Process.

3.   Order tool and validate tool according APQP timeline.

4.   Conduct pattern layout study to support product and process validation and quotation (for leather utilization study)

5.   Provide cutting secondary process study including cost, lead time and new process / equipment feasibility study timely to engineering director.

6.   Arrange functional samples (paperwork) building to support internal/customer validation.

7.   Work with Quality and production to review PFMEA and Control Plan.

8.   Define and optimize packaging design.

Activity 2: Lead process improvement to get an optimized cutting production (including cutting and its secondary operation processes) for mass production programs.

Goal Ensure process capability to meet customer expectation and reduce production cost

1.   Define and maintain Bill of Material and routine.

2.   Construct and optimize cutting process flow and production line layout

3.   Work with IE to calculate production cycle time to define capital investment and direct labor / indirect labor to support commercial team quotation.

4.   Design and source production tooling, jig and fixture to support mass production need.

5.   Work with quotation manager and material dept to define and improve package design

6.   Ensure to work with lean team to implement lean production processes, e.g Standardized work.

7.   Lead process optimization in term of optimal parameter setting, process capability study, FMEA, DOE, yield analysis and improvement (process yield) and cycle time reduction.

8.   Flawlessly execute engineering change process to make sure production compliance to updated process

9.   Overall ensure production follow process definition and control plan.

10.Take process yield ownership: set up yield database and track / analyze at least weekly base, resolve top 3 yield loss as continuous improvement initiative.

11.Develop and train operator to follow best nesting methodology to get optimal leather utilization.

1. Design tooling, jig and fixture, production table for finishing production, purchase and  ensure required tooling are available for production

Activity 3: Establish and update technical documentation

Goal Documentation control compliance of ISO9000 / IATF16949 system

1.Create and update engineering bill of material, cutting routine

1. Create and update process flow chart

2. Work with IE to create and update production layout

3. Other engineering documents  control, e.g. PFMEA, Working Instruction, Flow chart etc.

4. Train and ensure production follow the updated engineering documentation / specification.

Activity 4: Cutting die construction and maintenance

Goal Ensure cutting die quality match production requirement

1.Construct optimized cutting die for new program.

1. Manage and ensure right quantity and quality of cutting dies for mass production programs, ensure cutting die available and validated for forecasted production ramp-up.

2. Manage in-house and outsourced cutting die maintenance activities, ensure maintenance process control meet EO standard requirement and IATF16949

3. Upgrade cutting die construction, optimize cutting press control and cutting board selection to sustain long life usage of cutting die and cutting board and less die maintenance cost.

Activity 5: Various Plant Support

Goal Ensure product and technical problem be solved timely

1.  Lead process problem solving activities using 8 D / PSR format.

1. Execute new equipment acceptance test and develop acceptance criteria for new model of equipment.

2. Apply Best practice sharing from peer EO plants to proliferate to EOT facility.

3. Launch and APQP support: study and develop new process or equipment to match new requirement from customer.

4. Support plant lean and 6 sigma project and initiate continuous improvement project.

5. Provide necessary document and information and work with IE to get capital expenditure approved.

6. Any ad hoc support requirement from plant regarding Cutting process perspective.

Activity 6: Safety and on site contractor management

Goal Manage on site engineering activity is conducted in a safe and secure way through prior training and education.

1.    Ensure to apply safety requirement and Ergonomic consideration to accept a new process or new equipment.

2.    Responsible for all the Level 3 safety training to all the operators.

3.    Ensures all the on site construction or machine installation related activities are in line with safety and environment as well as secure requirement through training and education to the workers.

4.    Makes sure all the workers have insured for themselves and declared their responsibilities and liabilities in written form.

Activity 7: Goal

1)    Training

b.    Analyzes self knowledge and skills, propose self-annual training needs based on the Performance Appraisal Result.

c.    Is willing to share knowledge and experience with other people to help build a learning organization.

2)    Performance Management

Follows all procedures associated with the EOT Performance Management Program, manages own performance to ensure on going improvement.

3)    Career Development

Is encouraged to actively develop own career by obtaining the most up to date knowledge and skills.

4)    Employee Relations

Maintains amiable, respectful working relationships with co-workers both inside and outside the Department.

Responsibilities of Quality System:

Familiar with QMS procedures, strictly follows the company's system of IATF16949

Responsibility and authority for quality system and product requirement:

• Selection of special characteristics
• Corrective and Preventive action
• Capacity analysis

Responsibilities of OHS/EMS System:

Recognize with OHSE regulation, strictly follows the company's system of ISO14001 & ISO45001

Confidentiality Responsibilities:

High confidentiality concerns for the sensitive document or information handled for Company.

Comply with Employee Confidentiality Agreement.

Reporting Responsibilities:

1. Program progress report.

2. Equipment and production process capacity analysis.

What we're looking for

Qualifications:

• University degree with Mechanical, Industrial Engineering   or related background;
• Good written English. Be able to use Auto CAD, Solid Work .
• Over 5 year's relative experience. Multinational manufactory experience is preferred
• Familiar with mechanical manufacturing process.
• Prefer on leather industry experienced, good eyesight or Seating Automotive Industry .
• Must be a team player with good communication and interpersonal skills
• Knowledge or Skilled implement Innovation experienced.

What we offer

At Eagle Ottawa (Thailand) Co., Ltd., we are committed to providing a supportive and rewarding work environment for our employees. We offer competitive compensation, opportunities for professional development, and a range of benefits to support your work-life balance. Our company culture values collaboration, innovation, and a focus on continuous improvement, making it an excellent place to grow your career in process engineering.

About us

Eagle Ottawa (Thailand) Co., Ltd. is a leading manufacturer of high-quality leather products, serving clients in the automotive, furniture, and fashion industries. With a strong focus on innovation and sustainability, we are dedicated to delivering excellence in everything we do. Join our team and be a part of our exciting journey as we continue to push the boundaries of what's possible in the world of leather manufacturing.

Apply now to become our next Senior Process Engineer and contribute to the success of our organization.

• Attractive salary and benefits
• Opportunity to join a global company

About Our Client
A manufacturer specializing in automotive components such as radiators, exhaust systems, and cooling modules for passenger vehicles. The company integrates advanced production technologies and quality standards to serve both domestic and international automotive markets.

Job Description

• Lead new product development projects to ensure timely submission, qualification, and smooth transition to mass production.
• Facilitate reviews with internal teams, customers, and suppliers to minimize design changes, reduce lead time, and control costs.
• Manage schedules and resources for tooling, equipment, and production process engineering.
• Support engineering teams by analyzing challenges and providing effective solutions.
• Collaborate with manufacturers and customers to resolve issues and contribute to design improvements.
• Oversee manpower planning and monitor team performance to meet project goals.
• Maintain direct communication with global engineering teams to align on technical requirements and solutions

The Successful Applicant

• Bachelor's degree in mechanical, industrial, or production engineering; a master's degree is an advantage.
• Experience in Tier 1 automotive manufacturing with proven track record of new project development and in a leadership role.
• Strong leadership, communication, and presentation skills, with a proactive and achievement-oriented mindset.
• Proficient in English with knowledgeable in ISO/TS16949, ISO14001, and trained in APQP, FMEA, QPCC, and SPC.
• Have driver's license and be flexible to work in an industrial setting.

What's on Offer

• Attractive salary and benefits
• Opportunity to join a global company

Contact: Likasit Pongpangan
Quote job ref: JN

About Archetype

Archetype Group is a leading international construction consultancy company, with a full range of consulting services: Architecture & Master Planning, Building Engineering, Industrial & Process Engineering, Project & Cost Management. Currently with 27 offices registered in 20 countries, Archetype Group has been working on over 1,500 projects in 50 different countries to date.

Role Description

We are seeking a highly skilled and experienced
Group Process Engineering Manager
to sthengthen our global IPP team. The candidate's main role will be supervision and advisory support to engineers across our global IPP department, covering a range of industries (Chemical, Food, Pharma, Wet and Dry processing). This role requires strong leadership, strategic thinking, and collaboration with cross-functional teams.

This position is open to expatriate who are willing to be based in or mobilized to
Bangkok, Thailand.

Scope of Position

• Responsible for advising project teams on all technical matters related to their expertise.
• Responsible as the main Point of Contact during initial design engagement with Client, assist Business Development staff with technical expertise and lead Design effort.
• Responsible for assisting in technical training & mentorship of staff as well as the development of group and corporate standards, research and incorporation of innovative technologies.

Job Responsibilities

• Participates in project strategy meetings, develops design concepts and recommends systems, within discipline, produces pricing and proposal presentation documents and outline specifications.
• Assists with potential and new Client business development as the Technical Subject Matter Expert.
• Act as project design lead for process related disciplines (process, instrument, automation, piping & mechanical).
• Plans production and approves man-hour estimate for project effort for work of process related disciplines.
• Secure and actively support coordination works with other disciplines (out and within process).
• Creates discipline work plan for assigned projects and monitors workload status.
• Advises and assists Construction Project Managers, Superintendents and Subcontractors in the interpretation and clarification of construction documents.
• Reviews applicable shop drawings and submittal data for compliance with construction documents.
• Participates as requested in construction inspection to monitor compliance with design intent, construction drawings and specifications.

Skills / Qualifications

• Master degree in Process Engineering, Chemical Engineering, Mechanical Engineering, or a related field.
• Minimum 7 years of experience in process engineering, with at least 3 years in a managerial role.
• Strong background in manufacturing, construction, or industrial process optimization.
• Proven expertise in Hazop, Lean Manufacturing, Six Sigma, and continuous improvement methodologies.
• Excellent leadership, problem-solving, and decision-making skills.
• Strong presentation skills & project team management skills.

Please feel free to reach out to if you have any questions or need further information.

Req ID:

Remote Position: No

Region: Asia

Country: Thailand

State/Province: Chonburi

City: Laem Chabang

Summary
The Manager, Manufacturing Process Engineering is responsible for leading and managing the work of designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.

Detailed Description

Performs tasks such as, but not limited to, the following:

• Responsible for understanding and implementing the customers technical roadmap and related process development projects.
• Lead and implement the development and release of the full manufacturing process for new customer products.
• Understand and provide feedback on customers technical requirements to team members and management
• Responsible for developing and implementing costed and optimized feedback using Design for manufacturability (DFX) tools and processes, with the goal of reducing manufacturing cost and improving quality and reliability of product.
• Develop, plan and lead the assessment of the capability of process applications using Design of Experiments.
• Devise process controls and data collection strategies and evaluate complex data to assist with reporting yield, reliability and diagnoses to root causes failures impacting product quality.
• Ensure accurate and timely communication to management on critical technical and business issues.
• Set yearly plans and goals for the department and give direction on expected performance and provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.

Knowledge/Skills/Competencies

• Project Management - Ability to manage/lead complex, multiple line engineering projects that may also involve other functions. Demonstrate solid understanding of the technical, financial and people aspects of the project. Able to create a project/change management plan and ensure that the project is delivered within the assigned time and budget. Ability to recognize project barriers and develop mitigation plans
• Leadership - Demonstrate "People & Team Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning - Ability to create financial plans for your projects, align them internally with your line of management and other functions and externally if needed. Create project plans, profitability calculations, risk and sensitivity analysis, able to recognize barriers and mitigate profitability risks. Fully knowledgeable about internal and external financial reporting, accounting and tax requirements relevant to your area of expertise.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).

Typical Experience

• 10+ years of work experience in PCB assembly manufacturing field

Typical Education

• Degree or higher in Mechanical/Chemical/Electrical Engineering or equivalent.

Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

Company Overview
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.