16 Testing Analyst jobs in Thailand

Req ID: 126594
Remote Position: No
Region: Asia
Country: Thailand
State/Province: Chonburi
City: Laem Chabang
**Summary**
The Engineer, Test Manufacturing accepts, transfers, installs, improves and maintains automatic test equipment and test programs that are used for product testing and design verification. They also may support the test development of the test equipment and processes to ensure robust and high quality test solutions and final products are realized.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Perform reliability testing. Write test reports and provide analysis of the test data,
+ prepare documentation and recommendations.
+ Familiar with test equipment such as HALT and Environmental chambers, Power
+ supplies, DMMs, Data loggers, ThermocouplesIR cameras, Oscilloscopes etc.
+ Lead meetings with customers to update the Reliability activities status
+ Work with the cross-functional team to ensure the products can meet the design specification and reliability goals.
+ Conduct failure analysis (FA). Ensure that the Reliability issues have been resolved in the prompt and timely manner.
+ Direct and coordinate engineering activities concerned with development, procurement, Installation, maintenance and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
+ May provide training in new procedures to testing staff or technicians.
+ Perform moderately complex assignments of the engineering test function
**Knowledge/Skills/Competencies**
+ Ability to read schematics.
+ Knowledge of product and component failure modes and mechanisms.
+ Effective communication skills and can do attitude.
+ Good verbal and written communication skills in English
**Typical Experience**
+ Minimum 5 years working experience in hands-on testing of electronic products (Communication, Enterprise products, etc.)
**Typical Education**
+ BS in Electrical or Mechanical engineering or related field.
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Our Purpose
TERADYNE, where experience meets innovation and driving excellence in every connection. We are fueled by creativity and diversity of thought and in our workforce. Our employees are supported to innovate and learn something new every day.
We cultivate a culture of inclusion for all employees that respects their individual strengths, views, and experiences. We believe that our differences enable us to be a better team - one that makes better decisions, drives innovation and delivers better business results.
Opportunity Overview
+ Responsible for support of Magnum Testers NPI and High-Volume-Manufacturing Operations issues. 
+ Drive and facilitate Magnum testers production, yield, and reliability improvement.
+ Support US team on new product transfer, part qualification work, and software validation work.
+ Interface with suppliers, Design Engineering, board test and manufacturing team to achieve desired improvement goals.
+ Conduct product performance and reliability analysis to help improve product design.
+ Initiate conference meeting with US engineering team on technical issues when necessary.
+ Job details include, but not limited to;
+ Board Test:-
+ Familiar with instrument configuration, example SR620, Agilent 3458A.
+ Firmware programming knowledge - Altera Quartus Setup, programming tools.
+ SATADOM programming - Controller type vs SATADOM version & configuration at Testing Host PC.
+ Windows setup - networking configuration and Hosts.ini
+ Windows server setup & application/antivirus configuration.
+ Macro or programming batch files used at Board Test.
+ tftp knowledge - Plexus GSF - automated transaction.
+ Understand and resolve tester downtime issues.
+ Update Instruments.xml file for calibration.
+ FSI:-
+ Developed macro for any test block that required data analysis in FSI.
+ Qualification for alternative to EOL part - eg: DIMM / SSD / Switch 1G or 10G.
+ Create Jira case for any sustaining issues that require Product Engineering help or advice.
+ Work with contract manufacturer on evaluation or improvement projects based on PIP cases.
+ Update Antivirus CrowdStrike from time to time depends on IT's request.
+ Attending to SSL activation issues.
+ Attending to system configuration issues; example TIU, Network cards, SSD.
+ Generate host PC service tag versus system serial number report.
+ Perform system Testlogs transfer to Barterton server.
+ Spare parts review.
+ Release software on high manufacturing products through ECN.
+ NPI Release software.
All About You
We seek individuals who share our passion and determination. Our commitment to customer success drives us to go the extra mile. If you're ready to join us in this mission, take a closer look at the minimum criteria for the position.
+ BSEE is a must with a minimum of 5 years of working experience in electronic-related company
+ Understanding of testing methodologies, proficiency and ability to write macro/scripts and execute test cases.
+ Strong knowledge in analog circuitry.
+ Software development vs hardware (configuration/setup) in all phases.
+ Demonstrated ability to successfully bring products from NPI phase to mass production.
+ Ability to interface effectively at all levels of the organization, with excellent written and verbal communication skills
+ Good operational, leadership and interpersonal skills with excellent drive and enthusiasm.
+ Flexibility, persistence, resourceful, a drive to succeed.
+ Analytical, team player, mature thinking, organized and high sense of urgency.
+ Flexible working at multiple time zones and travel for training or audit.
+ Acquires a curious mindset and open to learning with logical thinking.
+ Location: Chachoengsao Thailand, Contract Manufacturing Site.
We are only considering candidates local to position location and are unable to provide relocation for this position
Benefits:
Teradyne offers a variety of robust health and well-being benefit programs, including medical, dental, fitness, heath screening, insurance, time off, tuition assistance programs, and more.
#LI-CM1
Current openings may involve access to export controlled technology and may be subject to export licensing requirements prior to employment. ATTENTION APPLICANTS WITH DISABILITIES: If you're unable to access our on-line application due to a disability you may visit one of our locations or our Corporate Office at 600 Riverpark Drive, North Reading, MA and request a paper application form. In addition, you may also contact the HR Service Center at or contact them at for additional assistance. LitePoint, a Teradyne Company is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, age, disability status, protected veteran status, or any other characteristic protected by law. We are a VEVRAA Federal Contractor.

Quality Assurance Supervisor
Job ID
226055
Posted
27-Jun-2025
Service line
Advisory Segment
Role type
Full-time
Areas of Interest
Building Management, Facilities Management, Property Management
Location(s)
Bangkok - Krung Thep Maha Nakhon - Thailand
**KEY FUNCTIONS:**
Be responsible for developing and implementing quality assurance processes to maintain service quality, process efficiency, and operational compliance with internal standards and external regulations. This role involves leading a team, conducting inspections and audits, and driving continuous improvement initiatives.
**RESPONSIBILITIES:**
**Site inspection and Internal Audit**
+ Supervise managed building team to ensure full compliance with ISO Operational, Engineering, Accounting and HSE requirements.
+ Perform regular inspections of managed buildings to ensure practical alignment of building operations and company standards and requirements.
+ Identify problems and follow up with operation team to the timely investigation and resolution of complains.
+ Plan and execute Quality Assurance practices in corporation with ISO and internal audit activities.
+ Supervise and cooperate with internal team across functional team to address and solve quality/service issues or drive improvement to meet customer satisfaction.
+ Prepare a QA report to Property Management Team in monthly basis.
**ISO Standard Audit**
+ Oversee the effective implementation, maintenance and improvement the internal process to comply with the ISO standard and related requirement such as ISO Audit, KPI report and Management Review.
+ Manage ISO documentation, including Management Manuals, System Procedures (SP), Standard Operation Procedure (SOP), Work Instruction (WI), and Forms.
+ Update PFMR documents, Action plan and P-FMEA with division concerned to ensure that all control documents will be available for audit process and managed buildings.
+ Ensure that document records and reports provided to QMR (PFMR) with accuracy.
+ Review effectiveness of PFMR documents, Corrective Action Request (CARs) and Preventive Action Request (PARs) before closure.
+ Contributing and supporting to DCs team on document control approval and document announcement.
+ Act as a main representative to coordinate and support internal and external audit mandatories (Consultant & Certified Body) as part of ISO certificate surveillance and renewal.
**QUALIFICATIONS:**
+ Bachelor's degree in quality management, Business Administration, or related field.
+ At least 5 years working experience in the role of Quality Assurance / Quality Control / or Quality Management.
+ Strong ISO knowledge and holding ISO Certification or training in ISO standards (ISO internal audit is a must).
+ Involvement in implementing ISO 9001, ISO 14001, ISO 45001 or ISO 41001 standards is preferrable.
+ Strong attention to detail and analytical skills.
+ Ability to multitask, prioritize, and manage time efficiently.
+ Effective communication in English (verbal and written).
+ Proficiency in MS Office such as Words, PowerPoint, Excel, and QMS system.
CBRE, Inc. is an Equal Opportunity and Affirmative Action Employer (Women/Minorities/Persons with Disabilities/US Veterans)

Supplier Quality Assurance Specialist
Company : Safran Cabin
Job field : Purchasing
Location : Lamphun , Thailand
Contract type : Permanent
Contract duration : Full-time
Required degree : Bachelor's Degree
Required experience : More than 8 years
Professional status : Professional, Engineer & Manager
Spoken language(s) :
English Fluent
Thai Mother tongue
# 2025-160007
Apply with one click Any questions ?
**Job Description**
3.0 Detailed department related duties
Summary of Duties
3.1 Responsible for ensuring quality compliance of parts /materials to meet product /part specification and standard related.
3.2 Control and monitor parts quality and on time delivery of suppliers
- Responsible for the incoming inspection team to ensure they perform according to WI of inspection works and that all incoming inspection detail is correct.
- Use statistical approach to monitor quality data of the supplier and publish weekly/month report basis or any report request.
- Collect and evaluate supplier quality and on time delivery data to identify process improvement opportunities within the supply chain.
- Maintain supplier quality and on time delivery metrics and provide regular feedback to all suppliers
3.3 Lead effort to resolve supplier quality issues.
3.4 Review and analyze supplier non-conformance reports, perform internal investigation and participate in material review board.
3.5 Work directly with supplier to investigate rot cause and identify/follow up corrective actions.
3.6 Issue NCR and or 8D to suppliers and coordinate with purchase team to follow their corrective action.
- Verify the defect of material issue related
- Initiate and follow-up Supplier Corrective Actions (SCAR) in partnership with Manufacturing Engineering to ensure complete and effective root cause analysis and corrective action implementation.
- Manage suppliers' non-conformances, including their disposition, documentation, and communication.
- Validate the action items by quality control technics, communicating with suppliers.
3.7 Perform supplier audits to evaluate supplier compliance to SAFRAN requirements and audits required for supplier approval/re-approval process. Follow up on corrective actions resulting from audit findings.
3.8 Implement quality-related action plans to enable suppliers to achieve an acceptable performance level.
3.9 Provide assistance to suppliers on new products, process capability improvements, quality systems development.
3.10 Work with Engineering Team and Sourcing team to evaluate potential suppliers.
- Evaluate potential suppliers' quality management systems.
- Ensure that the right quality, customer flow down and regulatory requirements are properly called out on the drawings, purchase orders, and contracts before their transmission to suppliers.
- Conduct capability assessments that verify supplier qualifications, and travel to assigned suppliers.
3.11 Participate as a member of the Material Review Board to review and disposition Supplier related Nonconformance Material Reports as required
3.12 Assist supplier on product qualification and first article inspection activities
3.13 Lead Advanced Product Quality Planning (APQP) activity as assigned from manager.
3.14 Assure that all supplier quality related activities are conducted in compliance with the SAFRAN Standard.
3.15 Supervise and coach SQA Engineer.
**Job Requirements**
4.1 Thai Nationality only.
4.2 Complete bachelor's degree in ME/IE/EE or any field related.
4.3 Experience: 5 years of progressive quality experience in aerospace, automotive or mechanical manufacturing environment with the ability to lead and influence others. AS/ISO standards. Experience in supplier quality audit is preferable.
4.4 Ability to read and understand drawing, technical specifications, technical report, etc.,
4.5 Ability to write technical documents, audit reports, non-conformance dispositions
4.6 Strong knowledge APQP, PPAP, 8D and FAI Process
4.7 Capable of MS. Office and other Application.
4.8 Other Skills: Must be very organized, detailed oriented, systematic and accurate. Strong problem-solving skills. Knowledge of Lean and six sigma tools is desired.
4.9 Fluent communication in English is mandatory. Additional languages are a plus.
**But what else? (advantages, specific features, etc.)**
3.16 Cooperate with teams related on problem solving, quality improvement activities.
3.17 Implement SAFRAN specification and standard on concern process.
3.18 Process improvement as project assign.
3.19 Lead and coach supplier quality engineer.
3.20 Support and represent Supplier Performance Management Manager as assign.
3.21 Reduce Quarantine Inventory of RTV.
3.22 FAI Report review and approval.
3.23 Weekly/Monthly/Quarterly reports.
**Company Information**
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets.
Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking.
Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
**Locate your future workplace**
Ban Klang, Mueang Lamphun District51000
Lamphun
Thailand
100,000
employees worldwide
27
Number of countries where Safran is located
35
business area families
+ Maps are available under theOpen Database Licence ( .
+ © OpenStreetMap ( contributors.
+ © Safran
Safran is an Equal Opportunity Employer
All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Req ID: 124957
Remote Position: No
Region: Asia
Country: Thailand
State/Province: Chonburi
City: Laem Chabang
**Summary**
The Lead Engineer, Test Manufacturing accepts, transfers, installs, improves and maintains automatic test equipment and test programs that are used for product testing and design verification. They also may support the test development of the test equipment and processes to ensure robust and high quality test solutions and final products are realized.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Failure Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of failure and yield loss.
+ Debug and troubleshoot product failure using data analytic, DOE (design of experiments), TDR, Six Sigma tools, and failure analysis methodologies
+ Collaborate with Customer, Design, Quality, Process, Supplier Engineer into problem solving and test yield and performance issues.
+ Drive failures troubleshooting and develop debug methodology since NPI
+ Set up continuous yield improvement and bone pile drive with customer and design team
+ Introduce proper debug tools and capacity per projected failure rate.
+ Analyze failure opportunity and develop and implement test, debug, component failure procedures for efficient and effective detection of defects.
+ Analyze test results and provide feedback to design and component engineers for product performance improvement.
+ Evaluate and integrate new test/debug technology to enhance capabilities and address evolving product requirements
+ Collaborate with the team on bone pile, scrap and NDF reduction, productivity improvements to cycle time.
+ Provide solution support to test engineers to improve detection, increase test coverage, and improve product performance.
**Knowledge/Skills/Competencies**
+ Deep understanding of automatic test equipment (ATE) used in electronics industry, such as flying probe testers, in-circuit testers (ICT), and functional testers.
+ Expertise in defining, specifying, qualifying, installing, supporting, and optimizing test processes and equipment for PCB assembly (PCBA).
+ Proven ability to lead and drive test process optimization initiatives for PCBAs, focusing on reducing test cycle time and improving first-pass yield.
+ Advanced proficiency in debugging test programs and fixtures for PCBAs using techniques like boundary scan, fault dictionary analysis, and circuit schematic interpretation.
+ Thorough knowledge of PCB manufacturing processes and common defects (e.g., solder joint issues, component placement errors, shorts, opens).
+ Strong understanding of electrical testing principles and methodologies relevant to PCBAs.
+ Familiarity with IPC standards related to PCB assembly and testing.
+ Knowledge of data analysis and statistical methods for interpreting test results and identifying trends in PCB assembly defects.
+ Excellent collaborative and communication skills to work effectively with SMT, Process, and Quality Engineering teams.
+ Strong project management skills to lead test equipment implementation and improvement projects.
+ Ability to analyze and interpret data from yield reports, equipment logs, product diagnostics, and test results to identify failure sources and yield loss.
+ Proven ability to debug and troubleshoot product failures effectively.
+ Proficiency in using data analytics techniques to identify patterns and root causes of failures.
+ Experience in designing and executing experiments to investigate and resolve issues.
+ Knowledge and experience in using TDR for failure analysis.
+ Familiarity with and application of Six Sigma methodologies and tools for process improvement and problem-solving.
+ Strong understanding and application of various failure analysis techniques.
+ Excellent interpersonal and communication skills to effectively collaborate with cross-functional teams and provide feedback.
+ Ability to drive failure troubleshooting and develop debug methodologies from the New Product Introduction (NPI) phase.
+ Understanding of continuous yield improvement principles and the ability to drive initiatives.
+ Ability to identify, introduce, and implement appropriate debug tools and capacity.
+ Skill in analyzing failure opportunities and developing and implementing efficient test, debug, and component failure procedures.
+ Ability to analyze test results and provide clear and actionable feedback to design and component engineers.
+ Ability to evaluate and integrate new test/debug technologies. Understanding of and contribution to productivity improvement initiatives.
+ Ability to provide effective solution support to test engineers.
**Typical Experience**
+ Minimum of 3 years of progressive experience in test engineering from electronics manufacturing or a closely related industry.
+ Demonstrated success in independently managing and improving test processes for complex data center systems.
+ Proven track record of developing and implementing effective system-level test strategies and automation frameworks.
+ Extensive experience in troubleshooting complex hardware and software integration issues during system testing.
+ Significant experience in analyzing test data to identify performance bottlenecks and potential reliability concerns in electronics industry.
+ Experience in integrating test processes with manufacturing execution or tracking systems.
+ Strong history of collaboration with hardware and software development teams to ensure product quality.
+ Experience in defining test requirements and working with vendors for specialized test equipment.
**Typical Education**
Bachelor degree or consideration of an equivalent combination of education and experience.
Educational Requirements may vary by Geography
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Req ID: 127227
Remote Position: No
Region: Asia
Country: Thailand
State/Province: Chonburi
City: Laem Chabang
**Summary**
The Engineer, Test Manufacturing accepts, transfers, installs, improves and maintains automatic test equipment and test programs that are used for product testing and design verification. They also may support the test development of the test equipment and processes to ensure robust and high quality test solutions and final products are realized. #LI-PC1
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Under supervision and with minimal assistance define, specify, qualify, install, support and optimize test process and test equipment solutions for manufacturing.
+ Lead test process optimization, with a focus on productivity improvements to cycle time and yield for a specific set of equipment within an Operations value stream
+ Debug of test process and equipment solutions using design of experiments, tools, and failure analysis methodologies
+ Collaborate with Quality, Process and Equipment engineers to detect and solve product and test yield and performance issues
+ Develop improvement roadmaps for test coverage, diagnosability, reparability, test time reductions and OEE
+ Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of yield loss
+ Provide solution support to process engineers to improve detection of known defect types as part of a Process Control plan
+ Support development of test equipment integration into Manufacturing Execution Systems including yield, tester log and product parametric information.
**Knowledge/Skills/Competencies**
+ **Strong analytical and problem-solving skills** with the ability to troubleshoot complex technical issues.
+ Proficiency in **statistical analysis and data interpretation** .
+ Solid understanding of **test methodologies and equipment** used in manufacturing (e.g., functional testing, in-circuit testing, parametric testing).
+ Familiarity with **Design of Experiments (DOE)** principles and their application in process optimization and problem-solving.
+ Knowledge of **failure analysis techniques** and methodologies.
+ Understanding of **quality management principles** and their application in a manufacturing setting.
+ Excellent **communication and collaboration skills** to effectively work with cross-functional teams.
+ Ability to **develop and present technical documentation and reports** .
+ Basic understanding of **Manufacturing Execution Systems (MES)** and data integration concepts (desirable).
+ Familiarity with **process control plans** and their relationship to test processes.
**Typical Experience**
+ 1 to 3 years of experience in manufacturing test engineering role, preferably within a high-volume production environment.
+ Demonstrated experience in **defining, specifying, qualifying, installing, and supporting test processes and equipment** .
**Typical Education**
Bachelor degree or consideration of an equivalent combination of education and experience.
Educational Requirements may vary by Geography
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Req ID: 127235
Remote Position: No
Region: Asia
Country: Thailand
State/Province: Chonburi
City: Laem Chabang
**Summary**
The Engineer, Test Development is responsible for the supporting hardware fixtures, liquid cooling systems, and test software automation across multiple intercompany organizations. #LI-PC1
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Work independently to develop technical solutions without assistance in a limited number of technical fields supporting common segments/technologies. May also solve complex problems in cooperation with a team of other engineers.
+ Attend and interact in technical customer meetings.
+ Provide high level test hardware and software solution architecture
+ Review equipment data sheets and select appropriate equipment based on requirements
+ Support creation of structural or functional test strategy and test plan to meet project goals and requirements
+ Support creation of technical proposals with costed BOM and hours estimates
+ Ability to research and comprehend relevant product technologies and skills associated with product technologies
+ Develop production test strategies based on product design specification
+ Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
+ Debug of tester issues using design of experiments, tools, and failure analysis methodologies
+ Execute all validation/qualification requirements by applying statistical and common industry methods
+ Stabilization of Test Solutions for manufacturing working to optimize with process teams focussing on cycle time and yield.
+ Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
+ Keep up to date with relevant industry knowledge and regulations
**Knowledge/Skills/Competencies**
+ Strong knowledge on test development (SW and Test fixtures)
+ Proven strong knowledge on test programming development (Python, Labview / Test Stand)
+ Familiarity with Altium Designer and PCB fabrication
+ Knowledge on fixtures design, setup/integration
+ Good verbal, and written communication skills both Thai and English
+ Must have experience with disciplined operations.
+ Must have experience working with and coordinating well with multiple intercompany organizations.
**Typical Experience**
+ Minimum of 3+ years of experience Structural and Functional Test development / support for electronic / automotive industry
**Typical Education**
+ Engineering Degree in Electronics or equivalent
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Req ID: 127234
Remote Position: No
Region: Asia
Country: Thailand
State/Province: Chonburi
City: Laem Chabang
**Summary**
The Engineer, Test Development is responsible for the supporting hardware fixtures, liquid cooling systems, and test software automation across multiple intercompany organizations. #LI-PC1
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Work independently to develop technical solutions without assistance in a limited number of technical fields supporting common segments/technologies. May also solve complex problems in cooperation with a team of other engineers.
+ Attend and interact in technical customer meetings.
+ Provide high level test hardware and software solution architecture
+ Review equipment data sheets and select appropriate equipment based on requirements
+ Support creation of structural or functional test strategy and test plan to meet project goals and requirements
+ Support creation of technical proposals with costed BOM and hours estimates
+ Ability to research and comprehend relevant product technologies and skills associated with product technologies
+ Develop production test strategies based on product design specification
+ Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
+ Debug of tester issues using design of experiments, tools, and failure analysis methodologies
+ Execute all validation/qualification requirements by applying statistical and common industry methods
+ Stabilization of Test Solutions for manufacturing working to optimize with process teams focussing on cycle time and yield.
+ Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
+ Keep up to date with relevant industry knowledge and regulations
**Knowledge/Skills/Competencies**
+ Strong knowledge on test development (SW and Test fixtures)
+ Proven strong knowledge on test programming development (Python, Labview / Test Stand)
+ Familiarity with Altium Designer and PCB fabrication
+ Knowledge on fixtures design, setup/integration
+ Good verbal, and written communication skills both Thai and English
+ Must have experience with disciplined operations.
+ Must have experience working with and coordinating well with multiple intercompany organizations.
**Typical Experience**
+ Minimum of 3+ years of experience Structural and Functional Test development / support for electronic / automotive industry
**Typical Education**
+ Engineering Degree in Electronics or equivalent
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Req ID: 127233
Remote Position: No
Region: Asia
Country: Thailand
State/Province: Chonburi
City: Laem Chabang
**Summary**
The Engineer, Test Development designs, develops and implements automatic test equipment and test programs for product testing and design verification which ensure robust and high quality assembled products in manufacturing.
The Engineer, Test Development may specialize in many areas but are generally categorized into Structural (verification of an assembly process by testing each of its smaller elements and their interconnects) and Functional (verification that a design will perform its main purpose). #LI-PC1
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Work independently to develop technical solutions without assistance in a limited number of technical fields supporting common segments/technologies. May also solve complex problems in cooperation with a team of other engineers.
+ Attend and interact in technical customer meetings.
+ Provide high level test hardware and software solution architecture
+ Review equipment data sheets and select appropriate equipment based on requirements
+ Support creation of structural or functional test strategy and test plan to meet project goals and requirements
+ Support creation of technical proposals with costed BOM and hours estimates
+ Ability to research and comprehend relevant product technologies and skills associated with product technologies
+ Develop production test strategies based on product design specification
+ Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
+ Debug of tester issues using design of experiments, tools, and failure analysis methodologies
+ Execute all validation/qualification requirements by applying statistical and common industry methods
+ Stabilization of Test Solutions for manufacturing working to optimize with process teams focussing on cycle time and yield.
+ Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
+ Keep up to date with relevant industry knowledge and regulations
**Knowledge/Skills/Competencies**
+ Strong knowledge on test development (SW and Test fixtures)
+ Proven strong knowledge on test programming development (Python, Labview / Test Stand)
+ Familiarity with Altium Designer and PCB fabrication
+ Knowledge on fixtures design, setup/integration
+ Good verbal, and written communication skills both Thai and English
+ Must have experience with disciplined operations.
+ Must have experience working with and coordinating well with multiple intercompany organizations.
**Typical Experience**
+ Minimum of 3+ years of experience Structural and Functional Test development / support for electronic / automotive industry
**Typical Education**
+ Engineering Degree in Electronics or equivalent
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.